2.5” / 3.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Table of Contents 1. Before you get started _________________________________________________________________________________________________________3 2 Easy Installation Guide ________________________________________________________________________________________________________7 3 Using Media Player ___________________________________________________________________________________________________________13 4.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 1. Before You Get Started 1.1 Safety Instruction 1. Always unplug the power cable before inserting the Hard Drive. 2. A power supply with a different voltage will damage and void this product’s warranty. 3. Keep this equipment away from humidity or any type of moisture. 4. DO NOT drop or shake the device. 5. DO NOT press or put any weight on the device. 6. DO NOT clean the device with alcohol, thinner, or benzene. 1.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Specification ■ Hardware Spec. Video Output Exterior Interfaces Audio Output Composite Out X1 HDMI 1.3 Out X1 YPbPr Out X1 Audio Out L/R X1 SPDIF(Optical) X1 File transfer port USB 2.0 Host port 2 Ports (USB 1 / USB 2) Data transfer with PC USB 2.0 mini port X1 Ethernet 10/100Mbps RJ-45 X1 ■ Wireless Dongle: (Optional) Wireless USB Dongle Optional Note: Please DO NOT buy any of wireless dongle in store.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l ■ Software Spec. Multi-Media Support MPEG-1 MPEG-2 MPEG-4 DivX 3/4/5/6, Xvid Movie Decoding H.
H i g h D e f i n i t i o n M e d i a 1.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r 2 Installation Guide 2.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 2.2 Hard Drive Installation Introduce NOTE: Installing a 2.5/3.5 Inch Hard Drive is not necessary if you only want to playback via an external USB device. 3.5” Hard Disk Drive Step by Step Installation Step 1: Please loosen the two screws completely from the back panel and slide the tray outward. Step 2: Install the 3.5” SATA Hard Drive into the SATA connector.
H i g h D e f i n i t i o n M e d i a Step 3: Insert the Hard Drive Screws and tighten. P l a y e r U s e r Step 4: Slide the tray back into the aluminum case and tighten both screws on the back panel.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r 2.5” Hard Disk Drive Step by Step Installation Step 1: Please loosen the two screws completely from the back panel and slide the tray outward. Step 2: Insert the 2.5” Hard Drive screw to connect the metal clip onto the 2.5” Hard Drive.
H i g h D e f i n i t i o n M e d i a P l a y e r Step 3: Install the 2.5” SATA Hard Drive into the SATA connector. Step 4: Insert the Hard Drive Screw to the metal clip and tighten.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r Step 5: Slide the tray back into the aluminum case and tighten both screws from the back panel.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3 Using The Media Player 3.1 Remote Control Introduction 1 18 4 20 1. POWER 16. EJECT 31. CM SKIP 2. Display 17. TITLE 32. SELECT 3. Audio 18. HOME 33. COPY 4 Number Buttons 19. TV SYSTEM 5. GOTO 20. SUBTITLE 6. Setup 21.MENU 7. Enter/ZOOM 22. VOL + / - 8. Browser 23. MUTE 9. STOP 24.REPLAY 10. PLAY 25. Navigation 11. PREV 26. RETURN 12. SLOW 27. PAUSE 13. Option 28. NEXT 14. REPEAT 29. FR/FF 15.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2 Getting Started Please make sure that you’ve installed the AAA battery into the remote control. 3.2.1 Connect the Media Player to your TV Connect either the HDMI or Composite Cable from Media Player to your TV. When connecting the HDMI cable to the TV. The Media Player will automatically detect the highest resolution your television will support. When connecting the Composite cable (CVBS) to the TV.
H i g h D e f i n i t i o n 3.2.3 M e d i a P l a y e r U s e r M a n u a l Setup On the main menu screen, you will be able to enter the “Setup” menu for the Audio, Video, Network, System, and MISC. You may press ENTER (Key 7) to manually input each setting.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.3.1 Audio This setting is focused on the Audio outputs. There are 4 digital outputs (HDMI LPCM, HDMI RAW, SPDIF LPCM and SPDIF RAW). HDMI LPCM (2CH): The player will decode the audio data to only two channels (STEREO: Left/Right) while the Media Player is connected to the television via HDMI. HDMI LPCM Multiple Channel: When Media Player audio output is connected to a TV via HDMI.
H i g h D e f i n i t i o n 3.2.3.2 Video M e d i a P l a y e r U s e r M a n u a l Aspect Ratio: Choose one that is suitable for your TV system. Pan Scan 4:3, Letter Box 4:3, or 16:9. Pan Scan 4:3 : Keeps the height of wide screen and cuts off the right/left screen to fit the 4:3 TV system. Letter Box 4:3 : Keeps the wide screen and blackens the border on the top and bottom of screen to fit the 4:3 TV. 16:9 : Choose 16:9 for a TV which supports 16:9.
H i g h D e f i n i t i o n 3.2.3.3 Network M e d i a P l a y e r U s e r M a n u a l Wired LAN Setup: Select the network settings between DHCP (AUTO) and DHCP (Manual). If you have a network device such as Router and it automatically assigns an IP. Please select DHCP (Auto). Otherwise, please manually enter the IP address, subnet mask, and default gateway. Wireless Setup (Optional): Select the wireless network setting.
H i g h D e f i n i t i o n 3.2.3.4 System M e d i a P l a y e r U s e r M a n u a l Menu Language: The languages available for selection includes English, Traditional Chinese, Spanish, French, Germany, Italian, Dutch, Polish, Czech and Simplified Chinese. Text Encoding: This setting is to display the subtitle, file name, and folder name in your language. Most of the time, Unicde UTF-8 can support most languages. However if your language is not supported, select the most suitable one from the menu.
H i g h D e f i n i t i o n 3.2.3.5 MISC M e d i a P l a y e r U s e r M a n u a l Resume Play: Select ON or OFF to resume the video’s last scene once you have STOPPED the movie. Slide Show Timing: This function is to set the timing of slide shows on the TV. The options are OFF, 2 Sec, 5 Sec, 10 Sec, 30 Sec, 1 Min, or 2 Min. Transition Effect: Select effect for slide show. Ken Burns: Default active play mode. Background Music: Plays background music during a slide show.
H i g h D e f i n i t i o n 3.2.4 M e d i a P l a y e r U s e r M a n u a l Browser & Play The Media Player can play Music, Photos, and Movies by plugging-in an external USB device. Enter the Browser menu to view all media files stored on the 2.5”/3.5” SATA Hard Disk or an external USB device. When plugging in an external USB device to the Media Player. Wait few seconds for the USB LED indicator to light up. You can now proceed to browse the media files on the external USB device.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.1 Play Movies Select the “Movies tab” or “All tab” to browse movie files. Use the Up/Down (Key 25) buttons to select a file or folder and press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) to return to the previous menu. Highlight a movie to view the movie preview on the right display. Press PLAY (Key 10) on the remote control to play the movie.
H i g h D e f i n i t i o n M e d i a be displayed. 2. Time Sync: Adjust the time of the subtitle. 3. Color: Adjust the color of the subtitle. 4. Size: Adjust the size of the subtitle. 5. Off set: Adjust the position of the subtitle. Adjust the navigation key in playing mode: Horizontal: Adjust the size of subtitle. Vertical: Adjust the position of subtitle. P l a y e r U s e r M a n u a l Press AUDIO (Key 3) on the remote control to switch different audio outputs.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.2 Play Music Select the “Music tab” or “All tab” to browse music files. Use the Up/Down (Key 25) buttons to select a file or a folder and press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) to return to the previous menu. Highlight a song to view the track information on the right. Press PLAY (Key 10) on the remote control to play the music.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.3 Show Photo Select the “Photo tab” or “All tab” to browse photo files. Use the Up/Down (Key 25) buttons to select a file or a folder and press Enter (Key 7) to play the file or open the folder. You may press RETURN (Key 26) to return to the previous menu. Highlight a photo to view a preview of the photo on the right. Press PLAY (Key 10) on the remote control to play the photo.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 3.2.4.4 Adding contents to the PLAYLIST A playlist creates a shortcut to allow you to quickly access media files. You can play all selected files together regardless of the different folders they are stored in.
H i g h D e f i n i t i o n 3.2.4.5 Slide Show M e d i a P l a y e r U s e r M a n u a l Go to Setup MISC Slide Show Timing and set the timing for the slide show. Press Right/Left buttons to choose the Photo tab and select photos that you’d like to play in the slide show. Press PLAY (Key 10) or ENTER (Key 7) to play the slide show. Background Music You may run the slide show feature to view your photos on the TV while listening to music.
H i g h D e f i n i t i o n 3.2.4.6 M e d i a P l a y e r U s e r M a n u a l File Copy This function allows you to copy files between an external USB device and NET. You can also delete files by moving them into the Trash Can. Please press COPY on the remote control (Key 33) to go to the File Copy menu at anytime. Use the Up/Down (Key 25) buttons to move the scroll bar to select the source and destination. Press ENTER (Key 7) to proceed.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4. Transcode Software After installing the Transcode Server you will be able to run the BitTorrent download and File Sharing manager on media player. 4.1 Installing and running the Transcode Server Please find the Transcode Server software on the CD and install the to your PC. After the installation is completed, proceed to run the Transcode Server.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.2 Adding Share Folders on a PC Adding shared folders to the NetShare Dialog will help your Media Player recognize the folders over the intranet. Keep the Transcode Server software running on the PC once you have selected the folders to be shared on the network. Your PC and folders will be seen in My Neighbors under BROWSER and FILE COPY of the Media Player main screen. TIPS: 1. By selecting a folder and then clicking on OK.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3. Ways to connect to the File Sharing folders and BitTorrent download Management Make sure your Media Player is connected to your home network and assigned an IP Address (Either assign from DHCP server or fixed IP). Once the Media Player has obtained an IP Address either manually or from a DHCP server, the IP Address will be displayed in the drop down menu after you click on Service tab Scan.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3.1 Setting up the Media Player Before you access the File Sharing folder or BitTorrent download management. Please go to the main menu of the Media Player and enter the following menus using the remote control: Setup System BT and SAMBA. Move the scroll bar down to BT and SAMBA and then press OK on remote control. The system will show two options (On/Off).
H i g h D e f i n i t i o n 4.3.3.1 Setting M e d i a P l a y e r U s e r M a n u a l You will need to set up the settings before you use P2P download. Please click on BitTorrent Download on the top of the page and then click the “Setting” tab. Max Download Rate: Sets the maximum download speed. Set it to “0” for no limit. Max Upload Rate: Sets the maximum upload speed. Set it to “0” for no limit. Default setting is 20KB/s.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l Delete the torrent file: When finished, the system will delete the torrent task automatically. Default setting is NO. Max simultaneous download task number: Setting of how many tasks you would like to run at the same time. Default setting is 4 tasks. Maximum is 10 tasks. When finish the setting, please click on the “Save Setting” to save all settings.
H i g h D e f i n i t i o n M e d i a P l a y e r 4.3.3.3 Deleting a Task 1. Click on “Check box” to select the task in which you would like to delete. 2. Click on “Delete” tab on the top to delete the task.
H i g h D e f i n i t i o n M e d i a P l a y e r U s e r M a n u a l 4.3.4 Account Management Please enable “Login Control” under the “System” tab of the Media Player before you click on Account Management. After the Login Control is set the system will require you to login. Account name: admin Password: 123 To modify your password, enter the Account Management from Neighbor Web and select modify password.