User's Manual

Page 1 of 2

User manual

Thanks you for choosing wireless laser mouse. This product uses wireless

transmission technology. Unlike traditional IR transmission technology, the

frequency used is 27 MHz, No need to point the mouse to receiver, No angle

restriction, and provide 256 ID (255 random and 1 default ID) for switching in

order to prevent interferences. 800 DPI, Not affected by space nor blocking

material in between. Provide a more accurate use for the consumers.

Because the new ID design, for using this mouse, all you need is insert the

receiver in the USB port, move the mouse, and the receiver will automatically

switch ID until is working properly, if is necessary. After changing new batteries,

the ID will automatically switch back to default Channel. If you want to

reconfigure ID, just press the right click, the left click and the middle click

simultaneously for 3 sec, the ID channel is then reconfigured. The USB

receiver’s small and compact size is idea for traveler user such as notebooks.

This product also include an USB extension Cable, able you to extend the USB

port that is usually in the back of PC to front of PC, making your work easier.

4stage sleeping saving more, help you to conserve energy used. Is

recommended to use alkaline batteries. In normal condition of use, the battery

should provide power for at least 2 month.

Product Description

1. Required Intel Pentium or Higher compatible PC

2. USB port, Plug and Play

3. OS: Windows 98 SE / Windows ME/ Windows 2000/ Windows XP

4. 3D Scrolling, support web browser, easy to use.

5. 800DPI resolution, more precise control

6. LED on receiver indicates connection status, not battery status.

7. 256 Id channel, preventing interference.

8. Standard and recommended distance of use, 1M. can use USB extension

cable to extend the receiving range.

9. Low consumption : Tested with 2 alkaline battery, diary use of 8 hr, for 2

month

Attention: If you a re using Windows 98 OS, because Windows 98 has not

preinstall USB default driver. You will need to install the USB drivers

beforehand: Insert the receiver into USB port, PC will detect new hardware,

then insert Windows 98 CD and follow the instruction showed.

Content

1. Wireless Optical Mouse .................................... 1pcs

2. Mini Receiver .................................................... 1pcs

3. USB extension cable .......................................... 1pcs

4. 1.5V AA battery ................................................ 2pcs

PAGE 1
User manual Thanks you for choosing wireless laser mouse. This product uses wireless transmission technology. Unlike traditional IR transmission technology, the frequency used is 27 MHz, No need to point the mouse to receiver, No angle restriction, and provide 256 ID (255 random and 1 default ID) for switching in order to prevent interferences. 800 DPI, Not affected by space nor blocking material in between. Provide a more accurate use for the consumers.
PAGE 2
5. Manual ............................................................... 1pcs Installation Process 1. Open the battery cover on mouse bottom. 2. Install the battery according to its direction showed, and put back the battery cover. 3. 3. Insert the receiver into USB port 4. 4. Turn on the PC, receiver will entering in ID searching mode automatically. And enjoy your new mouse Warning: Do not mix use different material of battery, this may cause explosion.