User's Manual

1. Register
- Coaster must be registered to Transmitter. It will not receive if
not registered.
(see page11, 1-6 “Coaster/Staff Pager Registration” )
2. Receiving Call
- LED, vibrate or buzzer alert will go off depending on setting
- (see page 13, 2-1 “Coaster LED Setting” & 2-2 “Coaster Buzzer
Setting”)
- It will alert until coaster is back on the Coaster Base
3. Out of range
- Occurs when the Coaster is Out of range of the Transmitter
(see page 13, 2-3 “Out Of Range Setting”)
- Displays “OUT” on the screen and vibrate & buzz alert
periodically
- Automatically turns alert off when the pager is within range
-Turn alert off when pager is back on the Coaster Base
4. Power Down
-Function to turn power off when not in use
- (see page 13, 2-4 “Coaster/Staff Pager Power Down)
- Back to normal operation once put back on the Charger Base
5. Factory Set
- Initialize Coaster from the Transmitter
(see page 15, 2-9 “Factory Set”)
6. RF Test
-Check receiving range
(see page 15, 2-10 “RF Test”)
- Response to periodically sent message from the Transmitter
- LED &Buzzer Alert when message received
7. Low Battery
- Vibrate when removed from the Charger Base
- Blinking LED
8. PIN Display
- Displays PIN when registered
- Displays “999” when abnormal message is received
- Displays “OUT” when our of range
9. Charging Indicator
- Right LED light comes on if fully charged on the Charger Base
- Left LED light comes on if not fully charged on the Charger
Base
- Left & right light comes on for Low Battery while in use
5. Description of Coaster
20