User's Manual

1. Register
-Staff Pager must be registered to Transmitter. It will not receive
if not registered.
(see page11, 1-6 “Coaster/Staff Pager Registration” )
- Displays PIN from the [INFO] menu
2. User Name Setting
- User name can be set from the transmitter via USB keyboard
(see page 12, 1-8 “Staff Name Setting”)
-Displays User from the [INFO] menu
3. Call / Message Receiving
- Vibrate and/or Buzzer occurs depends on setting
(can be set from the [Config] menu)
-Press any button to stop vibrate/beep while during incoming call
- Received message can be checked from the [Inbox]
-New message icon display on top of the screen. It will disappear
if message is read or is pressed while receiving a call
3. Out of range
-Occurs when the Staff Pager is out of range of Transmitter
(see page 13, 2-3 “Out Of Range Setting”)
- Enable the Out of Range Icon on top of the screen ( ) when
out of range
- Automatically turns off when the pager is back in range
- Periodically alerts when out of range
4. Power Down
- Function to turn power off when not in use
- Power Down setting from the [Config] menu
- Back to normal operation when is pressed for 5 seconds
5. Factory Set
-Initializing staff pager from the transmitter
(see page 15, 2-9 “Factory Set”)
6. RF Test
- Check receiving range
(see page 15, 2-10 “RF Test”)
- Response to the periodically sent message from the Transmitter
-Saves as “Test Message” in [Inbox]
7. Low Battery
-Low Battery Alarm
-Periodically displays “Low Battery” on the screen
-Displays icon when Low Battery
6.3. Functional Description
23