User's Manual
2-10 RF TEST
- Ability to call interval of 10 seconds in order to test
distance between the Transmitter and the pagers.
ex) testing with the registered coaster #1
PASSWORD
registered Coaster#
※ RF Test can be done for 2 hours if the Transmitter’s
output power is set on 10mW or for 10 minutes if set
on100mW or 2W.
※ Only button can be used while testing.
Use button to cancel.
※ Transmitting rate: 4800 bps / 6.25 kHz
2-11 Password Setting for Users
- Ability to set user’s password
ex) set to 1111
PASSWORD
2-8 INIT EEPROM
- Initializing all stored memories of the Transmitter
PASSWORD
User Password
2-9 FACTORY SET
- Re-set to factory setting
PASSWORD
User Password
※ Only applies to the registered pagers and if there’s no
registered pagers an “Error” will display.
※ Difference from the 2-8 is that it applies to both
Transmitter and registered pagers. If at least one
doesn’t receive, it won’t reset to factory mode.
15