Instruction Manual

8
1.2 Transport, handling, unpacking, location
Upon receiving your new appliance, check the package and the machine for any
damages that may have occurred during transportation. Visually inspect the exterior of
the package, if damaged, open and inspect the contents with the carrier. Any damage
should be noted and reported on the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notification should be made
verbally as well as in written form. Request an inspection by the shipping company of
the damaged equipment.
Retain all crating material until inspection has been made. Contact the dealer through
which you purchased the unit.
Check the compressor compartment housing and visually inspect the refrigeration
package. Be sure lines are secure and base is still intact.
1.3 Intended use and restrictions
The appliance should be destined only to the use for which it has been expressly
conceived. Any other use should be considered improper and therefore dangerous. The
manufacturer cannot be held responsible for injury or damage resulting from improper,
incorrect, and unreasonable use. Failure to install, operate, and maintain the appliance
in accordance with this manual will adversely affect safety, performance, component
life, and warranty coverage.
The appliance complies with UL471 and NSF-7(DISPLAY II) STANDARDS.
If you want know more about other restrictions about your equipment see the warranty
that is located in the final part of your manual.