Ice Maker User Manual

19
5) Shutdown (bin full) – Ice lls storage bin to level of BC. BC opens. GM, FM, CR, and
Comp de-energize. Diagnosis: When the icemaker is running, hold ice in contact with
BC bulb. If the components fail to de-energize, check BC.
6) Move the power switch to the "OFF" position and unplug the unit from the electrical
outlet.
7) Make any repairs necessary, then replace the removed parts in the reverse order of
which they were removed.
8) Plug the unit back in. Move the power switch to the "ON" position to start the automatic
icemaking process.
Legend: BC–bin control thermostat; Comp–compressor; CR–compressor relay;
FM–fan motor; GM–gear motor; STS–suction temperature safety