Service Mnaual
Table Of Contents
- Important Safety Information
- I. Construction and Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- IV. Refrigeration Circuit and Component Service Information
- V. Preparing the Appliance for Periods of Non-Use
- VI. Disposal
- VII. Technical Information
- A. Electrical and Refrigerant Data
- B. Wiring Diagrams
- 1a. Undercounter and Worktop: Refrigerator; Cabinet Thermostat
- 1b. Undercounter and Worktop: Refrigerator; Cabinet Thermistor/Control Module
- 2a. Prep Table; Cabinet Thermostat (Without Defrost Heater)
- 2b. Prep Table; Cabinet Thermostat (With Defrost Heater)
- 2c. Prep Table; Cabinet Thermistor/Control Module
- 3a. Undercounter and Work Top: Freezer; Cabinet Thermostat
- 3b. Undercounter and Work Top: Freezer; Cabinet Thermistor/Control Module
40
Pilaster and Inner Brackets Relocation
5) Remove the shelf from the door section, then remove the pilasters.
See Fig. 19.
Shelf
Right Side Pilasters
Fig. 19
Center Rear
Drawer Frame
Bracket
Vertical Mullion
Pilaster
Center Rear
Pilaster
Vertical Mullion
6) Remove the center rear drawer frame bracket and the ller screw. See Fig. 20. Slide the
center rear drawer frame bracket over to the new location and secure it. Place the ller
screw in the former center rear drawer frame bracket hole.
Fig. 20
Center Rear
Drawer Frame
Bracket
Center Rear
Drawer Frame
Bracket
New Center
Rear Drawer
Frame Bracket
Location
Filler Screw
Filler Screw
7) Remove the vertical mullion bracket. Rotate 180 degrees and mount it in the vertical
mullion right mounting holes. See Fig. 21.
Fig. 21
Vertical Mullion
Bracket
Vertical Mullion Bracket Rotation
Vertical Mullion
Vertical Mullion
Vertical
Mullion
Bracket
Vertical Mullion
Bracket
Vertical Mullion
Right Mounting
Holes
Vertical Mullion Left
Mounting Holes