Service Mnaual
Table Of Contents
- Important Safety Information
- I. Construction and Refrigeration Circuit Diagram
- II. Sequence of Operation and Service Diagnosis
- III. Controls and Adjustments
- IV. Refrigeration Circuit and Component Service Information
- V. Preparing the Appliance for Periods of Non-Use
- VI. Disposal
- VII. Technical Information
- A. Electrical and Refrigerant Data
- B. Wiring Diagrams
- 1a. Undercounter and Worktop: Refrigerator; Cabinet Thermostat
- 1b. Undercounter and Worktop: Refrigerator; Cabinet Thermistor/Control Module
- 2a. Prep Table; Cabinet Thermostat (Without Defrost Heater)
- 2b. Prep Table; Cabinet Thermostat (With Defrost Heater)
- 2c. Prep Table; Cabinet Thermistor/Control Module
- 3a. Undercounter and Work Top: Freezer; Cabinet Thermostat
- 3b. Undercounter and Work Top: Freezer; Cabinet Thermistor/Control Module
47
28) Place the lower drawer in the lower drawer slides and the upper drawer in the upper
drawer slides. See Fig. 34. WARNING! Be sure to close the safety clips when
reinstalling the drawer.
29) Make sure all gaskets are making good contact. Using a îashlight, check that there are
no openings around all gaskets.
30) Unlock the casters and move the appliance back into its original position. Lock the
casters once in position, then plug the appliance back into the electrical outlet. Allow the
appliance to cool down prior to loading it with food products.
Fig. 34
Model Shown: CRMR48-D2