Instruction Manual

28
OPERATION
Alkaline Water
Touch and hold the white button to dispense alkaline water (fig 9).
Chilled Still Water
Touch and hold the blue button to dispense chilled water (fig 10).
Chilled Sparkling Water
Touch and hold the green button to dispense chilled sparkling water (fig 11). Increase the bubble level to desired
fizziness level as described in the following page.
Hot Water
Touch and hold red button to dispense hot water (fig 12).
The red LED light indicator labeled “HOT WATER” at the right corner on the touch panel indicates that the DWM-20A
is ready to dispense hot water. If the red light indicator is off, the dispenser will not dispense hot water because the
child safety is inserted (“YES”). To turn on the hot water dispensing function, simply turn off the “Child Safety Switch”
located on the back of the dispenser (move it to its disabled position: up, where the word “NO” is indicated), and be
sure to turn on the red Hot Water switch on the back of the unit as well, in order to switch the hot water tank heater
on.