Instruction Manual

4) Cleaning and Sanitizing the Hot Water Tank

NOTICE: This operation must be carried out by an authorized technician. This operation takes one hour.

You must follow the guidelines and procedures for the cleaning and sanitizing solution established by the

manufacturer.

WARNING

WATER TO DRAIN MAY BE EXTREMELY HOT (190°F). Do not turn off the hot water switch on the

back of the dispenser. Before starting, confirm that the water line is properly connected.

1. Empty the hot water tank by using the drain line.

2. Prepare and add 950 ml of cleaning solution from the drain line into the hot water tank by using the hot water

tank inflow system (order separately). To check if the hot water tank is full of solution, dispense hot water until

you see solution coming out of the nozzle.

3. Leave the cleaning solution inside for 5 minutes.

4. Press the hot water button and dispense at least 2 gallons.

5. Empty all the liquid from the hot water tank by using the drain line.

6. Prepare the sanitizing solution (order separately). Dilute the sanitizing solution with water at 10-15%. Use the

same hot water tank inflow system to fill the hot tank.

7. Leave the sanitizing solution inside the Hot Water Tank for 20 to 30 minutes.

8. Begin dispensing liquid from the hot water line. You must dispense at least 2 gallons.

9. Repeat step 6, 7 and 8 above for a second time.

10. Empty all the sanitizing solution from the hot water tank by using the drain line.

11. Begin dispensing water from the hot water line. This will fill the Hot water Tank with water. Empty the hot tank

from the drain line and repeat this process twice to ensure that all the sanitizing solution is out.