Instruction Manual
Table Of Contents
- Important Safety Information
- I. Specifications
- A. Electrical and Refrigerant Data
- B. Dimensions/Connections
- 1. Air-Cooled Models (MAJ(-C))
- 2. Water-Cooled Models (MWJ(-C))
- 3. Remote Models (MRJ/3(-C))
- 4. Low Side, Parallel Rack System Models (MLJ)
- 5. Remote Condenser Unit URC-5F (use with F-1002MRJ(-C), FD-650MRJ-C, FD-1002MRJ-C)
- 6. Remote Condenser Unit URC-14F (use with F-1501MRJ(-C))
- 7. Remote Condenser Unit URC-22F (use with F-2001MRJ/3(-C))
- II. Installation and Operating Instructions
- A. Location
- B. Checks Before Installation
- C. How to Remove Panels
- D. Dispenser Unit/Ice Storage Bin and Icemaker Setup
- E. Electrical Connection
- F. Water Supply and Drain Connections
- G. Remote Condenser Unit Installation
- H. Parallel Rack System Connection
- I. Final Checklist
- J. Startup
- K. Bin Control Check
- L. Alarm Safeties
- III. Maintenance
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
15
5. Remote Condenser Unit URC-5F
(use with F-1002MRJ(-C), FD-650MRJ-C, FD-1002MRJ-C)
Units: mm [in.]
Icemaker
Model
URC-5F Heat of Rejection
AT 90°F (32°C)
WT 70°F (21°C)
F-1002MRJ 7,660 BTU/hr
F-1002MRJ-C 7,840 BTU/hr
FD-650MRJ-C 4,900 BTU/hr
FD-1002MRJ-C 8,900 BTU/hr
NOTICE
Allow 24" (61cm) clearance
at front and rear for proper
air circulation and ease of
maintenance and/or service
should they be required.
Rear
Top
6. Remote Condenser Unit URC-14F
(use with F-1501MRJ(-C))
Units: mm [in.]
Rear
Top
Icemaker
Model
URC-14F Heat of Rejection
AT 90°F (32°C)
WT 70°F (21°C)
F-1501MRJ
13,194 BTU/hr
F-1501MRJ-C
NOTICE
Allow 24" (61cm) clearance
at front and rear for proper
air circulation and ease of
maintenance and/or service
should they be required.