Instruction Manual

43
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certied Service Representative about
maintenance service.
WARNING
• Only qualied service technicians should service the appliance.
To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
Before Servicing: Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Fig. 20
Spout
Chute
Packing
Chute Insulation
Extruding
Head
Evaporator
Assembly
Reservoir
Float Switch
Rubber O-Ring
(FD-650 and Larger)
Nylon Ring
(FD-650 and Larger)
Evaporator
Condensate
Drain Pan
Infrared Sensor Lens
Evaporator Packing
(F-450 Only)
Spout-to-Chute Packing
Spout-to-Chute Bracket
(F/FD-1002 and Smaller)
Spout-to-Chute
Strap
Reservoir Hose
Overow Hose
Reservoir
Cover
Drip Guide
(F-1501 and Larger)
Model Shown: F-1501MAJ-C
Cutter