Instruction Manual

7
INSTALLATION
1.1 General information
1.2 Transport, handling, unpacking, location.
1.3 Intended use and restrictions.
1.4 Manufacturer’s identification label description.
1.5 Installation and assembly.
1.6 Connections (electric, gas, water)
1.1 General information
You can find the following symbols, or stickers to identify some type of warnings or
useful information about your equipment.
1.2 Transport, handling, unpacking, location
Upon receiving your new appliance, check the package and the machine for any
damage that may have occurred during transportation. Visually inspect the exterior of
the package, if damaged, open and inspect the contents with the carrier. Any damage
should be noted and reported on the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notification should be made
verbally as well as in written form. Request an inspection by the shipping company of
the damaged equipment.
Retain all crating material until inspection has been made. Contact the dealer through
which you purchased the unit.
Check the compressor compartment housing and visually inspect the refrigeration
package. Be sure lines are secure and base is still intact.