Service Manual

26
• When replacing a component listed below, see the notes to help ensure proper
operation.
WARNING
• Move the power switch to the "OFF" position and unplug the appliance before
performing maintenance to prevent electric shock or injury by moving parts. To
reduce the risk of electric shock, do not touch the power switch or plug with damp
hands.
• Before performing maintenance, move all beverages into another clean refrigerator.
WARNING
B. Important Notes for Component Replacement
V. Maintenance
1. Condenser
Check the condenser once a year and use a brush or vacuum cleaner to clean the
condenser as required.
2. Power Supply Connection
If a plug, power cord, or receptacle (three-section models) is damaged, replace it. Be
sure to connect the ground wire.
Components
Notes
Compressor
Install a new start relay, start capacitor, and compressor protector
(compressor protector is integrated with the start relay).
Compressor,
Evaporator
Fan Motor,
Condenser
Fan Motor
WARNING! To reduce the risk of electric shock, be sure to
reconnect the component's ground wire.
Controller
Be sure all the wiring lines are attached at the correct position on
terminals, wait 3-min. to see if the compressors turn on.