Instruction Manual

C. Air Filter

A plastic mesh air filter removes dirt or dust from the air,

and keeps the condenser from getting clogged. If the ﬁ lter

gets clogged, the showcase’s performance will be reduced.

Check the ﬁ lter at least twice a month. When clogged, use

warm water and a neutral cleaner to wash the ﬁ lter.

1) Hold the tabs located at the bottom of the louver, and lift

them up to release the louver from the body.

2) Pull the louver toward you.

3) Pull the louver downward.

4) Grasp the frame of the air ﬁ lter, and pull it toward you.

5) Clean the air ﬁ lter.

6) Reﬁ t the air ﬁ lter and louver in the reverse order of the

removal procedure.

D. Condenser

Check the condenser once a year, and clean if required by using a brush or vacuum

cleaner. More frequent cleaning may be required depending on the location of the

showcase.

E. Checking Ground Fault Circuit Interrupter

Push the test button at least once a month, and simulate a ground fault on the load circuit.

Fig. 6

Louver

Air Filter