Specification Sheet

KM-901M_H(3)
MODULAR CRESCENT CUBER
KM-901M_H(3)
03/30/17
Item # 13223
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
1
1/2
”
1/2
”
1
1/8
”
KM Cube Dimensions*
* approximate size in inches, image not to scale
Features
• Up to 928 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
• EverCheck
TM
alert system
• Removable air filters (Air-cooled model only)
• R-404A Refrigerant
Air-Cooled
Shown on optional bin B-900
KM-901MAH
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM
design
TM
TM
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 187-253V
Operating Limits
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Plumbing
• Panels easily removed and all components accessible
for service.
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance/service.
• Exterior fasteners are tamper proof torx pin screws.
• Removable/cleanable air filters under front panel
(Air-cooled model only)
Service
30" x 27
3/8
" x 37
7/16
"
W x D x H
Hoshizaki reserves the right to change specifications without notice.
Printed in the U.S.A.
Water-Cooled
KM-901MWH
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
Warranty:
Available on Bins:
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Top kit may be required. See Bin Spec Sheets. *Two unit application only.
B-900PF/SF
B-1150SS
B-250PF
B-500PF/SF
B-700PF/SF
B-800PF/SF
Air / Water Temp
Lbs. per 24 hours
Condenser
Model
70°/ 50°F 90°/ 70°F
ICE PRODUCTION
Per Cycle
Lbs. Cubes
Potable
Gal. per 100 lbs.
Condenser
Gal. per 100 lbs.
Max. Fuse Size
or HACR
Circuit Breaker
Heat
Rejection
BTU/hr.
Shipping
Weight
Voltage
ENERGY
STAR
®
WATER USAGE
90°/ 70°F 90°/ 70°F
ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs.
Amperage
920
928
889
899
KM-901MAH
KM-901MWH
KM-901MRH
KM-901MRH3
Water-Cooled
813
864
785
815
14.2
13.7
13.5
14.2
720
720
720
720
5.1
4.5
5.4
5.4
16.0
20.8
19.3
18.0
N/A
128
N/A
N/A
20A
15A
20A
20A
15,600
10,100
14,000
14,100
256 lbs.
249 lbs.
249 lbs.
258 lbs.
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/3
Air-Cooled
11.4A
8.7A
11.6A
7.0A
B-1300SS
B-1500SS*
B-1650SS*
Remote Air-Cooled
Remote Air-Cooled
1 Phase3 Phase
Water-Cooled 1 Phase
KM-901MRH
Remote Air-Cooled 3 Phase
KM-901MRH3