Installation Sheet
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
28
7) Open the upper door. Using a at head screwdriver, unhinge the upper hinge arm from
the upper hinge bracket. See Fig. 55.
8) Close the upper door, while maintaining a hold on the door, remove the upper hinge
bracket, then lift the door off the center hinge bracket upper pin and set aside.
See Fig. 56. Retain the upper door thrust washer and the center hinge bracket thrust
washers and washer for opposite side hinge bracket installation. NOTICE! Thrust
washers must be in place to prevent wear and damage to the hinge brackets.
Fig. 55
Fig. 56
Upper Hinge
Bracket
Upper Hinge
Arm
Upper Hinge
Bracket
Upper Hinge
Arm
Lower Hinge
Bracket
Lower Hinge
Arm
Lower Hinge
Bracket
Lower Hinge
Arm
9) Open the lower door. Using a screwdriver, unhinge the lower hinge arm from the lower
hinge bracket. See Fig. 57
Fig. 57
Upper Door
Upper Hinge
Bracket
Center Hinge
Bracket
Center Hinge
Bracket