Installation Sheet
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
8
B. Checks Before Installation
WARNING
Refer to the nameplate for electrical specications. The nameplate is located on the
right side wall of the 1 and 2 section cabinet interior and the rear wall of the
3 section cabinet interior. For more electrical connection details, see "I.G. Electrical
Connection." We reserve the right to make specication and design changes
without prior notice.
• Visually inspect the exterior of the shipping package and immediately report any damage
to the carrier. Upon opening the package, any concealed damage should also be
immediately reported to the carrier.
• Remove the shipping carton, tape, and packing material. Remove the protective plastic
lm from the exterior panels on all models and from the interior door panels on solid
door models. If the appliance is exposed to the sun or to heat, remove the lm after the
appliance cools.
• Remove all accessory containers before discarding the packing materials. Dispose of all
packing materials in a proper and environmentally responsible manner.
• Check for missing or damaged accessories.
Nameplate
Fig. 1
Nameplate
Model Shown: R1A-FS
Model Shown: R3A-FS