Parts List

23
RM-26
REFRIGERATION SYSTEM
Component Description
EVAPORATOR:
The evaporator is located inside the cooling
cabinet. As the gas ows at a low pressure through
the evaporator, it absorbs serpentine and removes
the heat from inside the cabinet.
EVAPORATOR FAN MOTOR:
This device produces the required circulation of
air through the cooling cabinet as well as over the
surface of the evaporator’s serpentine thermal
exchange area. This fan motor runs continuously.
The evaporator and condenser serpentines have
aluminum ns that help increase the surfaces for
the thermal exchange in an e󰀩cient way.
CAPILLARY TUBE:
It consist of several feet of tubing having a small
inside diameter. It is a device used to control
the amount od refrigerant that flows into the
evaporator.
DRIER:
The drier is located in between the condenser and
the evaporator. It traps and removes moisture
in the refrigeration system while allowing oil and
refrigerant to ow freely.
ACCUMULATOR:
The accumulator is located in between the
evaporator and the compressor. It is a storage
tank which receives refrigerant liquid from the
evaporator and prevents it from owing into the
compressor.
ENERGY SAVING ELECTRONIC
THERMOSTAT:
The electronic thermostat is responsable for
detecting temperature changes inside the cabinet.
It starts the compressor whenever the cabinet
temperature rises above the desired temperature.
The compressor recirculates the refrigerant
throughout the system, lowering the temperature
inside the cooling compartment. When the
temperature drops to the set point programmed
in the thermostat, it turns o󰀨 the compressor and
a new cycle starts again.
This electronic thermostat contains a dispositive
to save energy when the sales of the day are
over. This dispositive is activated by pressing the
“Energy Saving” button of the thermostat. When
this button is pressed, the lights are turned o󰀨
and the refrigerator starts operating in a warmer
temperature setting, consuming less energy.
COOLING CABINET:
This is the area where the goods are stored. It
has been designed to allow for constant cold air
circulation to ow through the goods.