Specifications Sheet

Dimensions / Capacity
Interior Storage Capacity (CF)
Overall Width x Depth
Height
Depth with Door Open
Adjustable Shelves
Shelf Dimensions (W x D)
Crated Shipping Weight
Crated Width x Depth x Height
Features
• Listed under NSF/ANSI Standard 7 for the storage
and/or display of packaged or bottled products.
• Large glass door is energy efficient Low-E multi pane
glass
• (5) white epoxy coated shelves per section with
product stops are standard
• Automatic energy saving hot gas loop on front edge
of refrigeration compartment helps prevent
condensation particularly in hot humid environments
• LED illuminated exterior canopy
• Energy efficient vertical LED interior lights illuminate
products on display
• Door is mounted on heavy duty hinges with self-
closing mechanism
• Silver painted aluminum exterior with NSF approved
white steel interior and stainless steel floor
• Electronic controller with energy saving mode will save
approximately 40% energy consumption during non-
peak hours
• Environmentally friendly CFC-Free Polyurethane
insulation with cyclopentane blowing agent.
• Stainless steel shelf clips adjustable in ½” increments
on anodized aluminum supports
• Refrigerant flow is controlled with a capillary tube
• 8 Foot cord and plug
• 2 inch leveling legs standard
• Three years parts and labor warranty
• Five-year compressor warranty
Capacity:
20 oz. bottles: 360
12 oz. bottles: 900
Electrical / Refrigeration
Voltage
HACR Breaker
Electrical Connection
(NEMA)
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
(kWh/day) @ASHRAE
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (oz)
Options
Hoshizaki reserves the right to change specifications without notice.
RM-26
03/09/18
Item # 13404
RM-26
Glass Door Merchandiser with Swing Door
Item #:
Project:
Qty:
AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Warranty
3 Year - Parts and Labor on
entire machine.
5 Year - Parts on Compressor
W x D x H
30” x 29.75” x 78”
*
*
RM-26
Printed in the U.S.A.
26 ft
3
30” x 29.75”
78”
58.1”
5
25.75” x 24”
340 lbs.
34” x 34” x 82”
115/60/1
15.0 Amps
5-15P
104-126
60° to 86°F
34° to 40°F
4.7
2.03
1250 (1/3HP)
R-134a / 6oz.
RM-26
RM-26
One Section
One Section
ANSI / NSF 7
Curved vertical corners with silver
aluminum exterior provide enhanced
product display
Electronic controller with visual and
audio high and low temperature alarms
Forced air evaporator for quick
temperature pull down
Organizer shelf (HS-5291)
Price tag holder (HS-5292)
Epoxy Shelf (HS-5317)
4” Casters (HS-5288)