Use and Care

Lower Hinge Bracket

4) While maintaining a hold on the door, remove the lower hinge bracket. See Fig. 10.

Leave the thrust-washer in place.

5) Pull out the bottom of the door slightly and gently remove the door from the appliance.

6) Remove the upper hinge bracket from the spring cartridge. See Fig. 11.

Fig. 10

Upper Hinge Bracket

Door

Fig. 11

Screw

Washer

Bolts

Thrust-Washer

D. Door Reversal

The appliance is provided with a cabinet design which, after being delivered to the

installation location, permits changing of the door swing from left to right or right to left. To

change the door swing, follow the steps below. Example shows change from right hinged

to left hinged.

WARNING

• Wear eye protection when reversing the doors.

• Keep ngers away from edge of upper hinge bracket. Spring cartridge can cause

the upper hinge bracket to move suddenly with extreme force.

1) Make sure the appliance is unplugged from the electrical outlet and the casters are

locked.

2) Open the door to the fully open position, then remove the inner screw from the upper

hinge bracket. See Fig. 8.

3) Close the door. WARNING! Keep away from upper hinge bracket. Upper hinge

bracket kicks out when door is closed. See Fig. 9. Remove the outer screw from the

upper hinge bracket.

Fig. 8

Outer Screw

Upper Hinge Bracket

Door Closed

Fig. 9

Inner Screw

Upper Hinge Bracket

Door Fully Open

WARNING! Upper

hinge bracket

kicks out when

door is closed