Use and Care

11) Move the door into position and maintain a hold on the door. Make sure the

thrust-washer is in place, then install the lower hinge bracket. Do not tighten the bolts

yet. Start each bolt for a few threads only and leave loose. See Fig. 16.

12) Apply Loctite Threadlocker Blue 242 or 243 to the outer screw's threads, then install

the outer screw into the upper hinge bracket. Do not tighten the screw yet. Start the

screw for a few threads only and leave loose. See Fig. 17. Note: The door being reversed

must be in the closed position. However, the adjoining door may be opened for ease of

access.

Lower Hinge Bracket

Bolts

Thrust-Washer

13) Open the door to the fully open position.

14) Rotate the upper hinge bracket inward into position using pliers. See Fig.18.

NOTICE! Be careful not to damage the nish. Apply Loctite Threadlocker Blue 242

or 243 to the inner screw's threads, then install the inner screw into the upper hinge

bracket.

15) Tighten all fasteners.

Fig. 16

Fig. 17

Outer Screw

Upper Hinge Bracket

Door Closed

Inner Screw

Upper Hinge Bracket

Door Fully Open

Fig. 18

Rotate upper hinge bracket using

pliers

Rotate Inward