Instruction Manual
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
15
Outer Cutting Board Brackets
and 5×10 Screws
Cutting Board
7. Attach the Cutting Board Brackets and Cutting Board (Prep Table Models)
1) Remove the screws from the cutting board bracket mounting locations on the appliance.
See Fig. 11a for Sandwich Top models and Fig. 11b for Mega Top models.
2) Use the screws removed in step 1 to attach the cutting board brackets.
3) Slide the cutting board into the cutting board brackets. WARNING! Make sure the
cutting board brackets and cutting board are secure. Otherwise, the cutting board
could come off and cause injury.
Inner Cutting Board Brackets and 5×12 Screws
Quantity:
2 for SR27A Mega Top Models
3 for SR36A Mega Top Models
4 for SR48A Mega Top Models
5 for SR60A and SR72A Mega Top Models
Fig. 11a
Use Upper Hole
Sandwich Top Models
Outer Cutting Board Brackets
and 5×10 Screws
Cutting Board
Inner Cutting Board Brackets and 5×12 Screws
Quantity:
1 for SR27A and SR36A Sandwich Top Models
2 for SR48A Sandwich Top Models
3 for SR60A and SR72A Sandwich Top Models
Fig. 11b
Mega Top Models