Instruction Manual
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
23
8) Place and secure the pilasters and shelf support clips in their new location. See Fig. 30.
Replace the shelf.
Door Relocation
9) With the door closed, loosen, but do not remove, the upper hinge bracket outer screw.
See Fig. 31. Next, open the door to the fully open position and remove the upper hinge
bracket inner screw. See Fig. 32.
10) Slide the upper hinge bracket out from under the outer screw and remove the door.
WARNING! Keep away from upper hinge bracket. Upper hinge bracket may spring
closed.
11) Replace the upper hinge bracket inner screw in its original position and tighten, then
tighten the upper hinge bracket outer screw.
Upper Hinge
Bracket Outer
Screw
Door Closed
Upper Hinge
Bracket Inner
Screw
Door Fully Open
WARNING! Upper
hinge bracket may
spring closed
Fig. 31
Upper Hinge Bracket
Upper Hinge Bracket
Fig. 32
Left Side Pilasters
Center Rear
Pilaster
Vertical Mullion Pilaster
Center Rear Drawer
Frame Bracket
Vertical Mullion
Vertical Mullion
Bracket
Fig. 30