Spec Sheet

SIDE VIEW
FRONT VIEW
PLAN VIEW
Worktop 27” Refrigerator with Drawers
27”
40”
4”
36”
6”
51”
1”
27”
30”
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Cabinet Construction
Drawer Construction
Refrigeration System
The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non-
electric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Refrigeration system utilizes an “off
cycle” defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
features stainless steel back, sides, and floor with an ABS top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the
shelves are adjustable in ½” increments. Cabinet walls and doors are insulated with 2” of environmentally friendly, CFC free, foamed in place polyurethane. 4” polyolefin, stem
casters (two with brakes) are standard.
Drawer fronts are constructed of high grade stainless steel inside and out and are insulated with 2” CFC free, foamed in place polyurethane. The bottom drawers will
accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will accommodate 4” deep pans
with either orientation. The top drawer will also accommodate 6” deep full-size pans when oriented longways from left to right and provide capacity for (2) ¼ size pans 4”
deep in the rear of the drawer. HS-5433 divider bar is recommended for this configuration. Drawer frames are formed of 16 gauge stainless steel and securely fastened in the
cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides have
a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount
handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
30”
1”
40”
24.17”
25.6”
20.32”
18.44”
14.7”
9.64”
25.5”
26.5”
1.9”
4”
19.6”
13.2”
WR27B-D2
06/07/21
Item # 13587
WR27B-D2