Instruction Manual
Table Of Contents
- Important Safety Information
- I. Installation Instructions
- II. Operating Instructions
- III. Cleaning and Maintenance Instructions
- IV. Preparing the Appliance for Periods of Non-Use
- V. Disposal
20
2) Remove the drawers. Pull the drawer out to its fully extended position. Open the safety
clips (one on each side) by sliding them forward, then rotating them up. See Fig. 24.
Lift up on the handle slightly, then pull to disengage the drawer. Be sure to support the
rear and front of the drawer while removing it. WARNING! Be sure to close the safety
clips when reinstalling the drawer.
Fig. 25
Horizontal Mullion Screws
Horizontal Mullion
Silicone
Horizontal Mullion Silicone
Horizontal Mullion
Upper Drawer
Lower Drawer
Drawer
Slides
3) Remove the 4 horizontal mullion screws, then cut the horizontal mullion silicone loose
and remove the horizontal mullion. See Fig. 25.
Fig. 24
Safety Clips
Safety Clip
Closed
Safety Clip
Open