User's Manual
Table Of Contents
- System Operating Manual ®
- Table of Contents
- Section 1 Descriptive Information
- Section 2 Principles of Operation
- Section 3 Equipment Description
- Section 4 Basic Operation
- Section 5 Select Mode
- 5.1 Modes of Delivery
- 5.2 PCA Only Mode
- 5.3 Continuous Mode
- 5.4 PCA+Continuous Mode
- 5.5 Protocols
- 5.6 Dose Limit
- 5.7 Clearing the History and/or Rx Settings
- 5.8 Using Review/Confirmation Screens
- 5.9 Changing Settings During Setup
- 5.10 Making Changes After Setup
- 5.11 Clearing Shift Totals
- 5.12 Changing a Vial
- 5.13 Adding a Supplemental Loading Dose
- 5.14 Checking History & Settings
- 5.15 History and Event Log
- Section 6 Advanced Programming with Hospira MedNetTM Software
- Section 7 Troubleshooting
- Section 8 Maintenance
- Section 9 Specifications
- Section 10 Prescription Delivery Limits
- Appendix A Generating Bar Code Labels (Hospira MedNetTM Software Enabled)
- Appendix B Network Printer Setup
- Appendix C Warranty
- Appendix D Contact Information
- Index
1- 6 Descriptive Information
430-04685-001 (Rev. 7/05)
WARNINGS, CAUTIONS, AND NOTES
Alert Messages used throughout this manual are described
below. Pay particular attention to these messages.
WARNING
A Warning Message contains special safety emphasis
and must be observed at all times. Failure to observe
a Warning Message is potentially life threatening.
CAUTION: A CAUTION usually appears in front of a
procedure or statement. It contains information that
could prevent irreversible product damage or
hardware failure. Failure to observe a CAUTION could
result in serious patient or user injury.
NOTE: A Note highlights information that helps explain a
concept or procedure.
This symbol directs the user to consult accompanying
documents.
NOTE: Figures are rendered as graphic representations
to approximate the actual product. Therefore, figures
may not exactly reflect the product.