User's Manual
Table Of Contents
- System Operating Manual ®
- Table of Contents
- Section 1 Descriptive Information
- Section 2 Principles of Operation
- Section 3 Equipment Description
- Section 4 Basic Operation
- Section 5 Select Mode
- 5.1 Modes of Delivery
- 5.2 PCA Only Mode
- 5.3 Continuous Mode
- 5.4 PCA+Continuous Mode
- 5.5 Protocols
- 5.6 Dose Limit
- 5.7 Clearing the History and/or Rx Settings
- 5.8 Using Review/Confirmation Screens
- 5.9 Changing Settings During Setup
- 5.10 Making Changes After Setup
- 5.11 Clearing Shift Totals
- 5.12 Changing a Vial
- 5.13 Adding a Supplemental Loading Dose
- 5.14 Checking History & Settings
- 5.15 History and Event Log
- Section 6 Advanced Programming with Hospira MedNetTM Software
- Section 7 Troubleshooting
- Section 8 Maintenance
- Section 9 Specifications
- Section 10 Prescription Delivery Limits
- Appendix A Generating Bar Code Labels (Hospira MedNetTM Software Enabled)
- Appendix B Network Printer Setup
- Appendix C Warranty
- Appendix D Contact Information
- Index
LifeCare PCA Infusion System 4- 23
430-04685-001 (Rev. 7/05)
4.6 Adjusting Settings
1. Press BUTTON to power on the
infuser. Upon initial start-up, the
self-test begins. It may take several
seconds for the Hospira logo to
appear on the screen.
2. Select
SYSTEM SETTINGS> to view
the Change Settings Menu.
NOTE: Date and time may also be
configured using the Hospira
MedNet
TM
Software (if enabled).
3. Adjust settings by selecting
the appropriate softkey.
LifeCare PCA
SELF TEST
LifeCare PCA
SELF TEST
COMPLETE
RAM . . . . . OK
FLASH . . . OK
CPU ID . . . OK
CPU . . . . . OK
TIMER . . . .OK
SYSTEM
SETTINGS
CONTINUE
SELECT
SETTI NG
TO CHANGE
TIME/DATE
CONTRAST
VOLUME
CONTINUE