User's Manual
Table Of Contents
- System Operating Manual ®
- Table of Contents
- Section 1 Descriptive Information
- Section 2 Principles of Operation
- Section 3 Equipment Description
- Section 4 Basic Operation
- Section 5 Select Mode
- 5.1 Modes of Delivery
- 5.2 PCA Only Mode
- 5.3 Continuous Mode
- 5.4 PCA+Continuous Mode
- 5.5 Protocols
- 5.6 Dose Limit
- 5.7 Clearing the History and/or Rx Settings
- 5.8 Using Review/Confirmation Screens
- 5.9 Changing Settings During Setup
- 5.10 Making Changes After Setup
- 5.11 Clearing Shift Totals
- 5.12 Changing a Vial
- 5.13 Adding a Supplemental Loading Dose
- 5.14 Checking History & Settings
- 5.15 History and Event Log
- Section 6 Advanced Programming with Hospira MedNetTM Software
- Section 7 Troubleshooting
- Section 8 Maintenance
- Section 9 Specifications
- Section 10 Prescription Delivery Limits
- Appendix A Generating Bar Code Labels (Hospira MedNetTM Software Enabled)
- Appendix B Network Printer Setup
- Appendix C Warranty
- Appendix D Contact Information
- Index
4- 32 Basic Operation
430-04685-001 (Rev. 7/05)
4.9 Loading Dose
After the drug concentration has been confirmed, an optional
loading dose may be programmed to provide an immediate bolus
to the patient.
1. Set Loading Dose (if desired) by
selecting
YES>.
If N
O> is selected, the screen advances
to the
SELECT MODE SCREEN. See
Modes of Delivery on page 5-2 for
information on modes.
NOTE: A supplemental loading
dose can also be delivered after
the programming sequence is
complete and infusing by opening
the door and selecting the
LOADING
DOSE> key.
2. Enter a Loading Dose
within the
displayed range.
3. Then press .
SET LOADING
DOSE?
YES
NO
MORPHINE PF
1 mg/mL
MORPHINE PF
1 mg/mL
ENTER
LOADING DOSE
THEN PRESS
ENTER BUTTON
0.1 - 10 mg
2 mg
milligrams
PREVIOUS
ENTER