HL400 & HL800 AN IG MAD E d To B rou e P Owner’s Manual in M I C H
All references to the HL400 also apply to the HL800 Introduction The HL400 is designed to heat your meal using conduction heating. This method requires 45 - 90 minutes to achieve proper serving temperatures but, conduction heating allows the HL400 to thoroughly and evenly heat your meal without cold or hot spots and maintain your meal’s moisture.
Quick Start Guide All references to the HL400 also apply to the HL800 Unpack: 1 Cut packaging tape and open the top flaps of the shipping box. 2 With flaps open, carefully flip the box up-side down onto a counter top. 3 Carefully lift the box upward, sliding the box off the HL400 . 4 Remove the remaining packaging materials from around and inside the HL400 unit and store them with the box.
Instructions for Use Usage Tips: All references to the HL400 also apply to the HL800 The HL400’s door must be closed for it to correctly operate. CAUTION: Liquid based meals (soups, chili’s, stews, etc...) may be very HOT when removed from the HL400. Make sure your meal is centered on the Smart Shelf and that the bottom of the meal has the maximum possible contact with the Smart Shelf’s heated surface. For best results, a meal should be cold when placed on an empty RED Smart Shelf.
To Use Your HL400 : 1 Place a single, frozen or refrigerated prepackaged meal or leftover container on an empty RED Smart Shelf. The Smart Shelf will turn BLUE indicating that your meal is heating.The Smart Shelf will turn RED when your meal’s heating is complete. Your meal will then be held at pathogenic safe serving temperature until you are ready to eat. 2 Remove your meal and enjoy! Notice: Heating time will vary based on the size of the meal. Most meals will complete in 45 - 90 minutes.
Cleaning Instructions & Tips Turn the power off, unplug the unit and allow it to cool to room temperature before cleaning. Use a soft, damp cloth or paper towel and a mild cleanser (if needed) to clean surfaces. Do not use bleach, ammonia, or petroleum based cleaners as they may damage the HL400’s polycarbonate doors or Smart Shelf frame. Do not spray cleaner directly on surfaces to be cleaned. Spray cleaner into a cloth, then clean the surfaces.
Service / Repair Information Hot Logic Customer Service Phone: 616.935.1040 email: support@hot-logic.com web site: www.hot-logic.com Instructional Videos at: www.youtube.com/myhotlogic Return Policy 60 day money back guarantee If you are unhappy with your HL400 you can return the unit to us at any time within 60 days of purchase date for a full refund (shipping & handling costs not included).
Warranty Seller warrants to the buyer that the Hot Logic product shall be free from defects in workmanship and materials for a period of one year from the date of purchase. Seller’s sole obligation under this warranty will be limited to service, repair, and/or replacement for a period of one year from the date of purchase, provided the Seller receives prompt written notice of any defect.