Use and Care Manual

Introduction
The HotLogic Family Size is designed to heat your meal using conduction heating. This method requires
60 - 90 minutes to achieve proper serving temperatures but, conduction heating allows the HotLogic Family
Size tothoroughly and evenly heat your meal without cold or hot spots and maintain your meal’s moisture.
Whenyour meal has finished its heating cycle the HotLogic Family Size will hold it at a pathogenic safe
serving temperature for several hours so that your meal is ready to serve when you are ready to eat. This
means youcan put your meal into the HotLogic Family Size in the morning and it will be ready for your lunch
break at noon,or 12:30 or 1:00 or... whenever. Simple convenience.
To ensure the best possible results when using the HotLogic Family Size it is important to note that the
food mustbe in a rigid container having a sealed lid and a flat bottom. Heat can not flow into the meal if
the container has a large rib around the bottom that would prevent it from making contact with the
HotLogic Family Size's heater surface. In addition, aluminum foil, plastic cling wrap, and paper towels are
not goodsubstitutes for a lid designed to seal the container. Although most foods will work great with the
HotLogic Family Size's, failure to use a flat bottom, sealed container may lead to disappointing results.
Enjoy Your HotLogic Family Size
The HotLogic Family Size works best with fresh meals made from scratch, frozen or refrigerated meals, and
coldleftovers in sealed containers. But, it’s your HotLogic Family Size so you can use it for any meal you
like. Just followthe usage guidelines in this manual and remember: ALWAYS check your meal to ensure it
has reached asafe serving temperature before consuming. Visit www.befoodsafe.org for details about
safe food serving temperatures and more.