Operation Manual

Page 14
Home Screen Features - Continued
Music
If installed, press this icon to access
the first Music screen.
Lights
Press this icon to access the first
Lights screens.
Status Indicators
Summer Timer
This indicator is on whenever the
Summer Timer is ON
Spa/Temp Lock This indicator is on whenever the
Spa Lock or Temperature Lock is ON.
Battery Life
This indicator tells you how much
battery life is still available to the
wireless remote control.
Battery
Charging
A flashing indicator tells you when
the battery is charging in the dock.
When indicator is solid, battery is
charged.
Working Screen Icons
Home Icon
Press to return to the Home screen.
or
Return Icon
Press to return to the previous
screen.
Advance Icon
Press to advance to the next
screen.
TEMPERATURE CONTROL
Press the actual temperature on Home screen to
display Set Temperature screen.
The set temperature range is from
80°F to 104°F (26°C to 40°C).
NOTE: The water temperature may
vary depending on the current use
and condition of your spa and outside
temperatures.
The factory set temperature of the spa water is 100°F (38°C).
After the spa has been used, the last temperature value set by the user
will be stored in memory. If power is disconnected from the spa, it will
automatically revert to the last set temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
MEMORY SCREEN
Press on Home screen to display Memory screen.
Press to activate the last saved set of operating
functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither of the
above buttons are used. Screen will automatically
revert back after 10 seconds of non activity.
CLEAN CYCLE SCREEN
Press on Home screen to display Clean Cycle screen.
Provided as a convenient timer
for manually adding water care
chemicals (see How to Add
Chemicals section). Activates jet
pump 1 on high speed for a ten
minute period.
Press to begin the Clean Cycle. The screen will
briefly display CLEAN CYCLE: ACTIVE
Press to return to Home screen if START is not
pressed. Screen will automatically revert back
after 10 seconds of non activity.
SETTINGS SCREENS
Press on Home screen to display first Settings Screen.
The first Settings screen allows
you to turn Temperature Lock,
Spa Lock, and Summer Timer On
or Off.
Operating Instructions