Operation Manual

SPA LOCK
When activated, the Spa Lock
feature disables all functions on the
control panel. It prevents others from
tampering with the jets, lights and
temperature settings on your spa. The
control panel will not respond to any
hard or soft buttons when pushed in
Spa Lock mode.
To activate the Spa Lock:
• Press the OPTIONS hard button.
• Press the soft button next to Set-up.
• Press the soft button next to Spa Lock Off.
IMPORTANT: The Temperature/Spa Lock icon will be displayed on
the Home Screen while the screens are locked.
To deactivate the Spa Lock:
• Press and hold the OPTIONS hard button and the LIGHTS hard button
at the same time for 3 seconds. The spa lock icon will turn off.
IMPORTANT: You can activate the spa lock feature even when
the temperature lock is already on. You do not need to turn off the
temperature lock in order to turn on the spa lock feature. If the
temperature lock was already on when you activate the spa lock, it
will remain on when you turn off the spa lock.
JETS CONTROL
The JETS hard button activates the jet
pumps. When the JETS hard button is
pressed, the jets menu will be displayed
on the control panel with Jet 2 in the
Low position (VANGUARD & ARIA
models), the Jet Pump icon will also
display. Press any of the soft keys to
change the jet functions between high
or low speed (when available), and off.
The Jet pump icon (on the Home Screen) will be displayed until the
button is pressed to turn off the jet pump(s), or after two hours of
continuous operation when the pump(s) is automatically shut off by the
control system.
The jet pump(s) will turn themselves off after two hours of continuous operation
to prevent overheating and conserve energy in case you forgot they were on.
The jets can be restarted again with no delay.
IMPORTANT: The jet pumps will not function while the spa lock feature
is activated.
You may also run through the entire jet pump cycle by only using the
JETS hard button as follows:
VANGUARD & ARIA
1st Press = Jet pump 2 on Low 2nd Press = Jet pump 2 on High
3rd Press = Both jet pumps on
high speed
4th Press = Jet pump 2 on
Low, Jet pump 1 on high
5th Press = Jet pump 1 on High 6th Press = All pumps off
SOVEREIGN
1st press = jet pump on Low 2nd press = jet pump on High
3rd press = jet pump OFF
PRODIGY & JETSETTER
1st press = jet pump on High 2nd press = jet pump OFF
LIGHT CONTROL
All HOT SPRING spas are equipped with Luminescence
®
Four-Zone
Multi-Color lighting.
Press the LIGHTS hard button to activate the Underwater Lighting and
display the screen.
To change the intensity of the spa’s underwater lights:
• Press the soft button next to Dimmer.
There are five (5) brightness levels
plus off.
IMPORTANT: Pressing the LIGHTS
hard button will also change the
intensity of the spa's underwater
lights when in the Underwater
Lighting menu.
To change the color of the underwater
lights:
• Press the soft button next to Color.
The colors are as follows: 1) Blue, 2) Aqua, 3) Green, 4) White, 5)
Yellow, 6) Red, 7) Magenta, 8) Color Wheel On, 9) Color Wheel Off.
To turn off all of the lights:
• Press the soft button next to Lights Off.
Your spa has additional lights that can be turned On and Off, or can be
a different color from that of the underwater lighting. To see the Aditional
Lighting menu:
• Press the soft button next to Additional Lighting to view the menu.
• Press the soft button next to Bartop to
turn Bartop (top edge of spa) lighting
On or Off.
• Press the soft button next to Pillow
to turn Pillow lighting On or Off (only
applicable on spas with pillows).
• Press the soft button next to the Water
Feature to turn Water Feature lighting
On or Off (only applicable on spas with water features)
• Press the soft button next to Color to change the color for all the above
water lights that are turned on. The color sequence is the same as that
of the Underwater Lighting menu.
IMPORTANT: To go back to the Underwater Light menu from the
Additional Light menu, press the LIGHT hard button or Back hard
button. When both color wheels are used at the same time, the color for
both underwater and additional lighting will be the same.
SUMMER TIMER
Your HOT SPRING spa is equipped with a summer timer. The summer
timer can be activated during extremely hot summer months to maintain
water temperatures. Activating the summer timer causes the heater
to immediately shut down. The circulation pump will remain on for
approximately 5 minutes pushing water through the heater to cool it
down. Both heater and circulation pump will then remain off for eight
hours. The summer time icon will be displayed on the Home Screen
and will remain displayed for as long as the summer timer is on. The
circulation pump and heater will automatically shut down for the same
eight hours every day until the summer timer is deactivated. It is
recommended to activate the summer timer in the morning so that the
Page 20
Operating Instructions