Operation Manual

spa is off during the hottest part of the day and so that the circulation
pump will start up again in the evening when you are ready to enjoy the
spa again.
IMPORTANT: The Summer timer will not lower the spa’s water
temperature below the ambient air temperature. Ambient conditions,
including humidity, wind and shading will affect your spa water
temperature.
To activate the Summer timer, simply follow these steps:
• Press the OPTIONS Hard button on the Control panel.
• Press the soft button next to Set up.
• Press the soft button next to
Summer timer to activate. The
Summer timer icon (on the Home
Screen) will display when activated.
IMPORTANT: If water temperature falls
below 80°F (26.7°C) the summer timer
will automatically be disabled.
• The Summer timer should be
deactivated when cooler temperatures return. To do this, simply repeat
last 3 steps. The Summer timer icon will turn off.
LANGUAGE
The Control panel screen can be viewed in five different languages.
The languages are English, French, German, Dutch, and Spanish. To
change languages:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-Up.
• Press the soft button next to
Language until the desired language
is visible.
IMPORTANT: Should you accidently
change the language screen into a
language you don't know, simply
repeat the previous steps where
Set-up is in the top right corner and
Language is in the lower right corner.
BRIGHTNESS
If you would like to change the brightness of the Control panel screen:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-up.
• Press the soft button next to Brightness to lower the brightness
from 7 down to 1.
IMPORTANT: Pressing the Brightness soft button at number 1 will
increase the screen brightness back to 7.
ACE WATER CARE (OPTIONAL)
If your spa has the ACE WATER CARE
system installed you can navigate to the
ACE screen as follows:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to ACE
Water Care.
(see ACE owner's manual for more information).
AUDIO (OPTIONAL)
If a wireless audio sound system is installed, both the Home screen and
the Options screen will display the Audio function.
To enter the Audio menu screen:
• Press the soft button next to Audio on the home screen.
• Press the soft button next to Audio to turn the Sound System on or
off. Audio must be ON to advance
the audio screens.
• Press the soft button next to ▲ or
▼ to change the volume level.
• Press the Function:SET soft
button to advance to the Play/
Pause function screen.
• Press the soft button next to
PLAY/PAUSE (top right corner) to play
or pause music.
• Press the Function:PLAY/
PAUSE soft button to advance to
the TRACK function screen. This
function will only control IPOD
source.
• Press the FORWARD or BACK soft
buttons to change the track (song).
• Press the Function:TRACK soft
button to advance to the SETUP
function screen. This function will
only control IPOD source.
• Press the ENTER SETUP soft button
to scroll to the SETUP SOURCE
screen.
IMPORTANT: If the Function:
SETUP soft button is pressed, the
screen will advance back to the
Volume screen. Press the Back hard
button to exit audio screens if desired.
• This Source screen illustrates the
current audio source the spa is using.
• Press ▲ or ▼ soft buttons to
change the desired source: iPod
®
,
TV, AUX or Bluetooth
®
.
To use the BLUETOOTH screen, your
audio BLUETOOTH device must be
paired with the spa. On your device,
find My Spa. If you do not see this on
your device you may be too far away
from spa. Pair your device and you will
be ready to use the BLUETOOTH.
Audio must be On to use BLUETOOTH
and only one paired BLUETOOTH device will work at a time.
• Press SETUP SOURCE soft button to advance to the SETUP Tone,
Treble screen.
Page 21
Operating Instructions