Product Manual

THANK YOU: The employees and management of
HYDRO TEK SYSTEMS, INC. thank you for
selecting our products. The production and quality
assurance team have taken the greatest care to
ensure that your new power washer exceeds the
standards set by you, the customer, and by Hydro
Tek engineering and management teams.
YOUR RESPONSIBILITY: This operator’s manual
was compiled for your benefit. By studying and
following the safety, installation, operation,
maintenance, and troubleshooting information
contained within, you can look forward to many
years of trouble-free service from your equipment.
Every person who will operate the equipment must
read and follow the safety warning and operating
instruction sections of this owner’s manual prior to
use. You are responsible for operating the product
properly and safely. You are also responsible to
follow the maintenance schedule on the back page
of this manual to keep your warranty active.
FREIGHT DAMAGE: If delivered by a trucking
company, please inspect for any concealed freight
damage and note this on the paperwork from the
trucking company before signing. Should you find
damage has occurred during shipping, do not
return the damaged merchandise to Manufacturer,
but file a claim immediately with the freight carrier
involved.
QUESTIONS: Help us provide you with the fastest
service. Please locate the enclosed warranty
registration card and return it to Manufacturer to
register your machine. If problems occur, contact
the dealer you bought your machine from, a local
authorized Hot2Go® service center, or call the
Manufacturer and ask for technical services.
THERE ARE NO USER SERVICEABLE
COMPONENTS ON THIS EQUIPMENT.
GETTING STARTED: If your dealer has not
prepared the machine for startup, you may need to
connect the hose to the pressure outlet on the
washer and connect the other end of the hose that
swivels to the trigger gun inlet and tighten. Mobile
Wash Skids are engine powered and shipped from
manufacturer with the fuel tanks empty and without
the battery. Fill the battery to the fill line with
electrolyte (available through your dealer or a local
auto parts store). Connect the battery cables, and
follow the operation instructions for starting.
Pressure Steamers are electric powered and will
require an appropriate electric outlet or disconnect
box and an electric plug that is rated for your
machine’s voltage and amperage and matches to
your electrical socket. Smaller machines are
equipped with a ground fault interrupter on the
electrical cord and you will need to press the reset
button after it is plugged in. (See Operating
Instruction section and enclosed page on
Installation Guidelines).
Hot2Go® WARRANTY: Manufacturer (Hydro Tek)
warranties Hot2Go® power washers to be free from
defective materials or workmanship for one year
from the date of original retail purchase.
Accessories are warranted for 90 days from their
original retail purchase date. Dealer will make the
required repairs. Purchaser is responsible for
transportation, freight and labor. This warranty only
extends to the original retail purchaser.
Items and Conditions Not Covered:
1. Normal wear items such as discharge hose,
guns, wands, spray arms, nozzles, quick couplers,
o-rings, pump packing, brushes, filters, belts, and
tires.
2. Labor charges or costs related to the removal of
defective parts, field labor charges, transportation
to service center, or cost of regular
maintenance/adjustments or damage from lack of
maintenance.
3. Damage due to freezing, abrasive fluids,
chemical deterioration, and scale build-up.
4. Damage from fluctuation in electrical or water
supply.
5. Any product or part that has been altered,
modified, over pressurized, misused, or has been in
an accident.
6. Dealer installation or damage from improper
installation of the machine or alteration by a dealer
or promise of additional warranty from dealer. The
manufacturer warranty is not transferable from the
dealer to the retail purchaser on used or rented
equipment.
WARRANTY PROVIDED BY OTHERS: Gasoline
and diesel engines and some electric motors are
warranted by the manufacturer of the component
and their warranty is provided through the
manufacturer’s service centers.
INTRODUCTION – WARRANTY 2