Product Manual

WARRANTY – SAFETY WARNINGS 3
GENERAL CONDITIONS: Manufacturer’s
responsibility with respect to claims is limited to
making the required repairs or replacements to the
original retail user, and no claim of breach of
warranty shall be cause for any cancellation or
rescission of the contract of sale of any Hot2Go®
product. Manufacturer reserves the right to change
or improve the design of any of its products or
illustrations without assuming any obligation to
modify any product previously manufactured.
This supersedes any and all previous warranty
statements for products purchased after March 20,
2010. Manufacturer is not liable for indirect,
incidental or consequential damages including any
cost of substitute equipment, loss of revenue,
pecuniary expense or loss, or inability to use a
Hot2Go® product. Manufacturer disclaims all
implied warranties, including those of
merchantability and fitness for use for a specific
purpose. Some states do not allow exclusions or
limitations on how long an implied warranty lasts,
so the above exclusions may not apply to you. It is
the buyer’s responsibility to ensure installation and
use of Hot2Go® products conforms to local codes.
Products exported outside the US and Canada are
covered solely by the warranty of the local export
dealer and this warranty does not apply.
HOW TO OBTAIN WARRANTY SERVICE:
1. List washer model#______________________
List serial #____________________
2. Contact your local service dealer and return the
Hot2Go® washer or part within the warranty period
along with your sales receipt. To locate service,
call Manufacturer and ask for technical services or
go to: www.hot2go.com
3. You also have the option to obtain a return
goods authorization and ship the questionable part
freight prepaid directly to the manufacturer. The
part will be evaluated upon receipt. If found
defective, Manufacturer will repair or replace part
under the conditions of warranty and return to you.
4. If the defective component is an engine or
motor made by another manufacturer, we, or your
authorized Hot2Go® dealer, can help you obtain
warranty service through the specific
manufacturer’s local authorized service center.
5. If you are unable to resolve the warranty claim,
write to Hot2Go, 2353 Almond Ave. Redlands, CA
92374, Attn.: Technical Services. Please enclose a
copy of the dated purchase receipt and explain the
nature of the defect.
ELECTRICAL PRECAUTIONS:
1. Observe all State, Local, and National codes
for the installation of your electrically powered
washer.
2. For a grounded product rated 250 volts, single
phase, or less: This product is provided with a
ground fault circuit interrupter built into the power
cord plug. (7.5hp single phase excluded; order
GFCI separately). If replacement of the plug or cord
is needed, use only identical replacement parts.
3. GROUNDING INSTRUCTIONS:
Cord Connected, Grounded Products:
This product must be grounded. If it should
malfunction, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. The product is equipped with a cord
having an equipment-grounding conductor. The
plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER – Improper connection of the equipment-
grounding conductor can result in a risk of
electrocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
plug provided with the product, do not cut off the
ground pin – if it will not fit the outlet, have a proper
outlet installed by a qualified electrician. Do not
use any type of adaptor with this product.
4. To comply with the national electric code, this
pressure washer should only be connected to a
receptacle that is protected by a ground fault circuit
interrupter (GFCI).
5. EXTENSION CORDS: Use of extension cords
is not recommended.
6. NEVER operate an electrically powered washer
after it has tripped a breaker or a ground fault
device without have the reason for the trip
determined by an authorized service engineer or
competent electrician.
7. Use only in a dry area. Do not handle electrical
cords and plugs when they are wet, when your
hands are wet, or when standing in water. Do not
spray high-pressure water on to the machine.
8. Disconnect power supply before making any
repairs or adjustments.
WARNING
THIS EQUIPMENT CAN BE HAZARDOUS TO THE OPERATORS
SAFETY AND ONLY AUTHORIZED PERSONNEL WHO HAVE
READ AND UNDERSTOOD THE OPERATON MANUAL SHOULD
BE PERMITTED TO OPERATE THIS UNIT. NEVER ALLOW
CHILDREN TO PLAY ON OR AROUND THIS EQUIPMENT.