Shared Broadband Internet Access VPN Gateway 3-Port Switching Hub, DMZ Port Quick Install Guide

ManualsBrandsHotBrick ManualsNetwork CardFirewall VPN SoHo 401 VPN

P/N 9570NN0001

SoHo 401 VPN

Shared Broadband Internet Access

VPN Gateway

3-Port Switching Hub, DMZ Port

Quick Install Guide

This guide covers only the most common

situations. Please refer to the full User

Manual on the CD-ROM if your LAN has any

of the following:

• Router

• Existing DHCP Server

• PCs using Fixed (Static) IP Addresses

Summary of content (6 pages)

PAGE 1
SoHo 401 VPN Shared Broadband Internet Access VPN Gateway 3-Port Switching Hub, DMZ Port Quick Install Guide i This guide covers only the most common situations.
PAGE 2
Requirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. Setup Œ Physical Installation 1. Ensure the Soho 401 VPN and the DSL/Cable modem are powered OFF before commencing. Leave your DSL/Cable modem connected to its wall socket (phone line or cable input). 2. Use standard LAN cables to connect PCs to the LAN ports on the Soho 401 VPN.
PAGE 3
• If desired, connect a PC (server) to the DMZ port. To use multiple servers, use a standard LAN cable to connect the DMZ port to a normal port on another hub, and connect your servers to the hub. PCs connected to the DMZ port are isolated from your LAN. 3. Connect your DSL/Cable Modem to the WAN port. Use the cable supplied with your DSL/Cable modem, or a standard network cable. 4. Connect the supplied Power Adapter and power on. 5. Check the LEDs • The Status LED should flash, then turn Off.
PAGE 4
Specified (Fixed) IP Address IP Address allocated to you, and related information. PPPoE Login name and password. PPTP, Big Pond (not used in USA) Login name and password, Server IP Address 5. On the final screen of the Wizard, run the test and check that an Internet connection can be established. • If the connection fails, check both your data and the Cable/DSL modem.
PAGE 5
• Internet Access For Windows 9x/ME/2000 1. Select Start Menu - Settings - Control Panel - Internet Options. 2. Select the Connection tab, and click the Setup button. 3. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)" and click Next. 4. Select "I connect through a local area network (LAN)" and click Next. 5. Ensure all of the boxes on the following Local area network Internet Configuration screen are unchecked. 6.
PAGE 6
Setup is now completed. Macintosh Setup To access the Internet via the SoHo 401 VPN: 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/IP panel, saving your settings. Note: If using manually assigned IP addresses instead of DHCP, the required changes are: • Set the Router Address field to the Soho 401 VPN 's IP Address.