Owners manual
Table Of Contents
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?
4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC. 2
4007 (Coupe) / 4008 (Convertible)
Subframe Connectors 67-69 Camaro/Firebird
4009
Subframe Connectors 68-74 NOVA
Thank you for your purchase from our new line of F-Body parts.
Please call us at (877) 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis products.
Installation pictures were done on a Camaro. Nova installation is the same.
Subframe Connectors
Your new subframe connectors will increase the overall rigidity of your chassis and
improve handling and response. These engineered components connect the rear frame
rails with the front subframe to simulate a complete full frame chassis.
:
Notes
The subframe connector is essentially a Weld-In component, effectively connecting
itself to the front subframe and rear frame rails. However, you may choose to
bolt-in the front connection to allow front subframe removal if need be. Hardware for
the bolt-in procedure is included.
:
Before You Start
The installation of these subframe connectors will require you to grind and weld. It is
recommended that a trained professional install this product. Always wear eye
protection when grinding or welding.
:
Please read the entire manual before starting.
All
images will depict the driver side installation.