Owners manual
Table Of Contents
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?
4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC. 9
Tack weld 2-3 of the rosette holes on the inboard tab to the frame rails. Tack weld the
rear edge of the connector. Once you have these minimum welds complete, you may
raise the vehicle again to access the outboard tab. Completely weld both rosettes and
any edges. Lower the vehicle back on it’s wheels and finish the inboard rosette welds
and remaining edges to be welded. To protect the brake line (driver side) and the fuel
line (passenger side) from the welding radiation and sparks, cover them with aluminum
foil.
Outboard Tab