MINI THE PERSONAL PORTABLE OVEN Owner’s Manual
Introduction The HotLogic Mini is designed to heat your meal using conduction heating. This method requires 60 - 90 minutes to achieve proper serving temperatures but, conduction heating allows the HotLogic Mini to thoroughly and evenly heat your meal without cold or hot spots and maintain your meal’s moisture. When your meal has finished its heating cycle the HotLogic Mini will hold it at a pathogenic safe serving temperature for several hours so that your meal is ready to serve when you are ready to eat.
WARNING To Reduce The Risk Of Fire or Electrical Shock Do not plug into an outlet with a voltage other than 110-120VAC / 60Hz Do not submerge device in water or other liquids Do not place the device where it can fall or be pulled into a tub or sink Do not reach for a device that has fallen into water.
Usage Guidelines Read all the following items before using the device: Do not touch the heated surface when loading or unloading a meal. Always check a meal for proper temperature before consuming. A variety of container materials will work and are safe to use with the HotLogic Mini. Plastic, Aluminum, Glass and Paper based containers will work, provided the container is rigid, flat bottomed, sealed with a lid and can withstand 212 degree Fahrenheit temperature.
To Use Your HotLogic Mini: 1 Unzip the bag, open the lid. 2 Place your meal on the heater tray. 3 Zip the lid closed. 4 Plug in the power cord to turn on your HotLogic Mini. 5 Go about your day. The HotLogic Mini will take 60-90 minutes to fully heat your meal. Food will be held at serving temperature until your ready to eat. 6 Remove your meal and enjoy! Unplug the power cord to turn off your HotLogic Mini. Notice: Heating time will vary based on the size of the meal.
Service / Repair Information If you have questions or need assistance with your HotLogic Mini please contact us using the following information. Hot Logic Customer Service phone: 616.935.1040 email: support@hot-logic.com web site: www.hot-logic.
Warranty Seller warrants to the buyer that the Hot Logic product shall be free from defects in workmanship and materials for a period of one year from the date of purchase. Seller’s sole obligation under this warranty will be limited to service, repair, and/or replacement for a period of one year from the date of purchase, provided the Seller receives prompt written notice of any defect.