Instruction Manual
20210407
陈姝彤
V1.0
器外文化
小猴智能厨房秤_ 使用说明书_中文版
105g 金东哑粉过哑油
小猴智能厨房秤 6972140850330 QWCFC00121001 HLE0003CN
器外文化产品包装图纸
折叠方式
6
7 8 9
05 Specifications
3000g
Maximum weighing capacity:
1g
Minimum weighing capacity:
0.1-0.5g
Measurement accuracy:
g/ml/oz/lb:oz
Measurement unit:
AAA batteries × 3
Power source:
approx. 8m
Bluetooth transmission distance:
Bluetooth 4.0
Wireless connectivity:
180s
Automatic shutdown time:
10-40℃
Operating temperature:
-10℃~50℃
Storage temperature:
≤90%RH
Storage humidity:
181.8x168x26.8
Dimensions:
Net weight: approx. 342g
Android4.4/ios8.0 and above systems,
supports Bluetooth 4.0
Equipment requirement:
5
03 How to Use
02 Screen Display
Turning the product on/off
Press the “switch/unit switching knob” for 3s when the product is on, the
screen will go off automatically, and the product will enter shutdown status.
If no operation is performed within 180s, the product will automatically shut
down.
Change metering units
The product supports three metering units, and the default unit
is “g”.
Display
Switch/unit switching knob
Battery compartment cover
1
2
3
4
2
3
4
1
01 Product Overview
Read this manual carefully before use, and retain it for future reference.
Thank you for choosing HOTO Smart Kitchen Scale. Please do not use this
product on a table having water.
Rotate the battery compartment cover until the unlocking mark is aligned,
and then remove the battery compartment cover, and put the battery in the
battery compartment.
06 Warnings
During use, the following prompt messages may be displayed on the main
display area:
Troubleshooting
The display fails to reset
after turning on
Note:
If the QR code on the manual cannot be scanned, search for the product
name and add it.
In addition, due to updates of the Mi Home/Xiaomi Home app, the actual
operation may slightly differ from the preceding description. Please follow
the prompts of the app.
Connect to Mi Home App
Scan the QR code on the right or search “Mi Home”
in the APP store to download and install the Mi Home/
Xiaomi Home app. If installed, you will be directed to
the device connection page.
This product works with Mi Home. You can control
it via the Mi Home app.
“Works with Mijia” is for software verification only.
Xiaomi is not responsible for the production, standard
implementation, quality supervision and other aspects
of the product and the company.
Low battery voltage
Initialization and zero
calibration failure of device
Cause
Solution
Please replace the
battery
Please put the device
on a hard horizontal plane
Message
Flashing battery symbol
Battery
Weighing data
Weighing unit
Bluetooth connection status
模切：
折痕：
70MM
70MM
This product cannot be used for trade weighing.
Press the “switch/unit switching knob” when the product is off, and then
a 3s countdown will be displayed on the screen. When 0.0g is displayed,
weighing can be performed.
Net weight and reset
Press the“switch/unit switching knob”when the product is on, and then
the screen will display“0000” and turn to“0 . 0 g”, and reset is successful
at this time.
Please put this product on a hard and flat horizontal plane before turning it
on for use.
You can wipe the product with wet cloth, but do not let any water enter the product;
04 Troubleshooting
Maintenance
Do not clean the product with corrosive lotion;
Please do not place the product vertically during storage;
Please remove the battery if you will not use this product for a long time.
1 2
4 5 6
Bluetooth/connection
The product supports Bluetooth connection. When it is started, Bluetooth
automatically turns on with the “ ” icon flashing. Then, open the Mi
Home/Xiaomi Home app, click the “Add Device” button at upper right
and connect devices as per the APP guide. When the product is connected,
the “ ” icon will be always on. If the connection fails within 180s,
Bluetooth will automatically turn off to save energy.
Note: This product is a smart home appliance, a complete, non-independent
module with a built-in complete Bluetooth module (CMIIT ID:2019DP6424).
Performance standard:GB4706.1-2005,GB4806.5-2016
Note: Please do not turn off the product before it is completely turned on.
It can be switched among “g”, “ml”, “oz” and “lb:oz” by
rotating the “switch/unit switching knob”.
When the Bluetooth is connected, real-time data
synchronization can be kept between the software
terminal and the hardware. In addition, the following
additional functions are available at the software terminal:
Pour-over coffee mode (Timer function is supported, so you can record the
ratio of coffee powder to water, brewing time & water injection rate, and save
every brewing strategy. Besides, auxiliary pour-over coffee study and daily
brewing records are also supported.)
Data notes (You can save and name weighing data; check, edit or delete
saved data)
Recipe generation (A recipe can be generated when you tick this function;
picture adding & data editing, addition of comment & score, sharing of long
recipe data picture, etc. are supported)
D6000053
3
1
2
3
4
4
5
5
5
5
6
6
6
6
7
7
7
7
FCC WARNING:This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.