Binary IR Cab Owner's Manual DESIGN INSPIRATION
Welcome Congratulations on your new Hotone Binary pedal! You have just added some serious power to your pedalboard. The Binary series lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling system ensure a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED screen offers clear, detailed display.
Features ✪ Grown out of next-gen XTOMP technology ✪ Compact, easy-to-use dual footswitch IR cabinet simulator pedal ✪ Advanced CDCM modeling system ensures realistic playing experience ✪ Dual DSP-powered platform ensures high sound quality ✪ 24-bit A/D/A conversion, up to 110dB S/N ratio ✪ 100 legendary cab models ✪ 10 CDCM based legendary studio microphone simulations ✪ Detailed mic position (X, Y, Z) and room simulations ✪ 8 CDCM based power amp simulations with presence control ✪ Supports 3rd party IR f
Panel Introduction 1-2. ▽/△: For selecting presets, bypass/mute, and other parameters. 3. +/- buttons: For selecting effects and adjusting parameters. 4. GLOBAL: For power amp and room control settings. 5. SAVE/EXIT button: For saving or canceling parameter changes. 6. OLED screen: Shows bank/patch numbers, setting values and other operation info. 7. VOL: Controls effect output level. 8-10. MIC POSITION X/Y/Z: Controls the mic position simulations. 11.
Connections Note: TURN ON FIRST, TURN OFF LAST. Always mute the mixer/audio interface before plugging or unplugging power jacks, cables, etc. When you're using a mixer or an audio interface, please adjust the onboard knobs carefully to avoid signal clipping.
Display Plugging in your power supply will turn on the device.
Select a Patch Tap either ▽/△ footswitch once to change patches (hold one footswitch to switch patches quickly). Tap △ footswitch repeatedly to cycle through patches in the order 00, 01, 02,03, …, 99, then 00. Tap ▽ footswitch to change patches in the opposite order.
Bypass/Mute Tap both ▽/△ footswitches at the same time. To set the unit to bypass: release the footswitches within 2 seconds. To set the unit to mute: hold the footswitches more than 2 seconds until “MUTE” appears on the screen. Tap both ▽/△ footswitches again to go back to normal. In Bypass/Mute status, all the LED knobs will go out. Note: AUX IN will not be muted in MUTE status.
Edit 1. Adjust the parameters Use the onboard knobs to adjust the effect parameters. The screen display will be shown as below when adjusting: 1 - Current parameter value you’re adjusting (shown: volume) 2 - Saved parameter value in the current patch (PREV. = Previous value) y 0 x 0 x z The MIC POSITION X/Y controls the microphone horizontal/vertical position, set X=Y=0 to set the microphone on axis; Z controls the distance between microphone and speaker cap.
Edit 2. Select a different effect Use the +/- button to change to another cab sim (hold for fast changing): The inverted bank/patch number indicates that the current patch has been edited.
Edit 3. Adjust power amp and room settings In main display, press the GLOBAL button to edit the power amp in the current patch. Press the GLOBAL button repeatedly to cycle through power amp type, presence, room amount settings and firmware version info (after firmware v1.1.1 update): Use the +/- buttons to set the power amp type (or turn power amp sim off)/power amp presence/room amount (or turn room simulation off).
Save Hold the SAVE/EXIT button to activate save function. The screen will be shown as below: Use the +/- buttons to choose a location (hold one button to choose quickly). Tap the SAVE/EXIT button to confirm saving. Press either footswitch to cancel saving and go back to edit status.
Check Firmware Version You can check firmware version on your Binary IR Cab after updating to firmware v1.1.1 or later.
Cab Models List* No.
Cab Models List* 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 TWD CHAP 1x8 TWD PC 1x10 BASE MAN 2x12 VIB 30 1x12 SILV TWIN 2x12 DUAL SHOW 2x15 SUP VERB 4x10 USA REC 1x12 SUP ZEP 1x6 SUP DUO 2x12 SUP BOLT 1x15 VOXY 15 1x12 VOXY SILV 2x12 VOXY GRN 4x12 HIWY VINT 4x12 THE WAY 4x12 BRIT DARK 4x12 BRIT AX 4x12 BRIT G12L 4x12 DUM M160 4x12 This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR
Cab Models List* 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 BIG SV 8x10 WORK BEN 1x15 FLIP TOP 1x15 BIG SV 4x10 ALU BASS 4x10 USA BASS 2x10 ADAM BTM 1x15 ADAM TOP 4x10 MK BASS 4x10 VOXY BASS 2x12 ALU BASS 4x12 WORK MAN 4x10 HF BASS 4x10 SUB BASS 1x15 SUB BASS 4x10 This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR This IR is based on is based on is based on is based on is based on is based on is based on is based on is based on is based on is
Mic Models List* No.
Power Amp Models List No.
Output Data -10dBV/100Hz IN Input Signal PHONES mV dBV (Built-in) IR ON 115.7 -18.7 DESIGN INSPIRATION -10dBV/1kHz IN OUTPUT mV dBV PHONES -10dBV/10kHz IN OUTPUT dBV mV dBV 131 -17.6 137 mV 350 -9 399 -7.9 FLAT IR 159 -15.9 548 -5.2 -15.4 461 -6.3 BYPASS 95.7 -20.3 302 -10.3 98.5 -20.1 309 -10.2 PHONES OUTPUT mV dBV mV dBV 10 -39.3 33 -29.6 19.3 -26.6 45.7 -19.7 99 -20 379.8 -9.
Specifications Number of Patches: 100 Number of Effects: 100 cabs, 8 power amp types, 10 mic types Digital Processing: 24-bit A/D/A conversion, 48 kHz sample rate Supported IR file format: 24-bit, 48kHz Max.
