Volume / Expression / Wah pedal www.hotoneaudio.
Volume / Expression / Wah pedal 6.LED: INPUT 1 1. INPUT: 1/4"mono audio jack, for connecting guitar. DC 9V Q MODE V·W·V/W WARM·CLASSIC 2 3 4 6 5 7 2. MODE: V—Volume mode, for use as volume pedal. W—Wah mode, for use as a wah pedal. V/W—Switchable volume/wah mode, combining volume and wah pedals in one. 3. TONE: For selecting wah filter frequency range. MODE LED Color V Green W Blue V/W Green/Blue 4. Q: For adjusting wah filter frequency width. 5.
Thank you for purchasing a Hotone product. Scan the QR code for manuals in other languages. 感谢您购买Hotone产品，请扫描右侧⼆维码获取其他语⾔说明书。 Panel 8. Footswitch: Switch between on/off status or active volume /wah in V/W mode (Soul Press II cannot be bypassed in V/W mode). 8 STATUS 9 EXP OUT OUTPUT TUNER OUT 10 11 12 11. OUTPUT: 1/4"mono audio jack, for connecting to one other gear. 9. STATUS: A set of LEDs showing the current pedal position.
Battery Installation & STATUS Setting All Off All On VOL Only 1. Remove two screws from the battery compartment with a phillips screwdriver. 2. Remove the battery compartment cover. 3. Install a 9V battery. Specifications Pot Resistance (EXP out): 10kΩ Input Impedance: 1MΩ Output Impedance: 100Ω Wah Range Selector: WARM—290Hz to 1.4kHz CLASSIC—360Hz to 1.8kHz Current Consumption: Max 30mA Dimensions: 81mm (W) x 162mm (D) x 51mm (H) Weight: 500g 4. Use the 3-way switch to set STATUS LEDs.
