User Manual

Presets can save and recall multiple loop on/off statuses. A set of 4 presets is called a bank.
Patch Kommander features 12 presets (4 presets × 3 banks).
In Preset mode:
Tap footswitch 1-4 to select preset 1-4.
Tap the BANK (SW A/B) footswitch to select a bank. When switching banks, the preset you selected
won't be changed (and all LEDs under L1-L4 buttons will keep flashing) until you tap footswitch 1-4 again to confirm your selection.
To program a preset:
(1) Select a preset.
(2) The L1-L4 button LEDs will indicate loop on/off status.
All changes will be automatically saved.
Bank & Presets
If you're suffering from signal loss caused by a long signal chain, turning on the buffer will help.
Turn it off if you want to keep your signal pristine and when using pedals that don't work well with buffers.
Buffer
L1
L2L3L4
SEND
RETUR N
SEND
RETUR N
SEND
RETUR N
SEND
RETUR N
OUTPUT
SW A/B
TUNERINPUT
L1
BUFFER
OFF/ON
L4
L3
L2
DC 9V
FOOTSWITCH JACK
Connections