User Manual

Customizing Your Ampero II Stomp
Touch the right or left arrows to flip through the panel.
When MIN > MAX
MAX
MIN
When MIN < MAX
MAX
MIN
Calibrate
The Calibrate option helps you calibrate your expression pedal.
It is important to calibrate the expression pedal if you find the
sweep has very little or too much change in the effect you’ve
set.
Press Calibrate on the selection panel, and these instructions
will appear:
1. Bring the pedal all the way up (back) and press NEXT.
2. Then press the pedal all the way down and press NEXT.
The calibration will be set, and this message will appear:
3. Then, strongly press the pedal toe down and press NEXT.
5. If the calibration fails, this message will appear.
Press REPEAT to begin the calibration process again.
Or press BACK to exit the calibration process and return to
the previous menu.
4. The calibration will be set, and this message will appear:
Many of the factory patches have been set up to use with
expression pedal. These can be used without any further
setup.
27
DES I GN IN S PIRATION