User Manual

Customizing Your Ampero II Stomp
FS4 TAP and FS5 TAP can be set up as follows:
•Loop Rec/Play: Record/play loop phrases
•Loop Stop: Stops looper playback
•Loop Undo/Redo: Executes undo/redo function
•Loop 1/2 SPD: Switches 1/2 speed record/playback on/off
•Looper Rev: Switches reverse record/playback on/off
•Looper: Enter looper menu
•Looper Exit: Exit looper menu
•Tuner: Enter/exit tuner
•Bank+/Bank-: Change banks by toggling up or down
•Tap Tempo: Tap tempo function
•Patch+/Patch-: Change patches by toggling up or down
•CTRL: CTRL function depending on patch settings
•EXP On/Off: Switching external expression pedal on/off
•Unit Mode: Switches between Patch mode and Stomp mode
•A1-B6 On/Off: Switching corresponding slot on/off
Plus:
When set EXP/CTRL FUNC to Single FS, the FS4 TAP defaults to Tap Tempo;
When set EXP/CTRL FUNC to Dual FS, the FS4 TAP defaults to Bank- and FS5 TAP defaults to Bank+.
MIDI Settings
This menu allows you to set up Ampero II Stomp’s MIDI input source, MIDI I/O channels, MIDI clock I/O options.
MIDI IN SOURCE lets you decide MIDI input source:
•DIN Only: Receives MIDI messages from MIDI IN jack only
•USB Only: Receives MIDI messages from USB jack only
•Mixed: Receives MIDI messages from both MIDI IN and USB jacks
Default is set to Mixed.
INPUT CH (DIN/USB) and OUTPUT CH (DIN/USB) options are for setting MIDI input/output channels of USB/MIDI jacks. The
ranges are all Omni-1-16, defaults are all Omni.
CLOCK SOURCE lets you choose MIDI clock source for syncing with other devices:
•Internal: Use internal clock only
•DIN Only: Uses only external clock, receives MIDI clock messages from MIDI IN jack
•USB Only: Uses only external clock, receives MIDI clock messages from USB jack
•Mixed: Uses both internal/external clock sources (receives MIDI clock messages from both MIDI IN and USB jacks); later clock
messages will replace previous messages
Default is set to Mixed. If you set clock source to DIN Only or USB only, Ampero II Stomp’s Tap Tempo will not function.
CLOCK OUT (DIN/USB) switches MIDI clock output on/off. Turn on to use Ampero II Stomp as your main MIDI clock. If you’re
using clock out, the external clock input will be ignored; if you set CLOCK SOURCE to DIN/USB Only, there will be no MIDI
clock output. Defaults are all set to Off.
34
DES I GN IN S PIRATION