User Manual

FX Title
Description
Parameters & Ranges
Signal
Processing
Envelope
This is a highly customable envelope filter.
Fine tune the knobs onboard to make your
creations: Funky wah, synth-y vibe, robot
talk, cyber voice sweep – You decide!
Sweep: Selects filter sweeping direction
Sens: Controls the sensitivity
Spread: Controls the filter stereo separation
Mode: Controls the filter mode
Range: Controls the filter frequency range
Freq: Controls the filter frequency range midpoint
Q: Controls the filter Q
Dry Level: Controls the dry signal amount
Level: Controls the effect output
Mono I/O
AutoFilter(7)
Crier G
The Crier G is a controllable band pass filter
which delivers a variety of auto-wah
effects. Designed for guitars, this model has
many parameters for shaping the tone of
your wah sound. Start with the frequency
range adjustment to decide the basic flavor
of your wah-wah.
You can use Tap Tempo function to control
the effect speed by turning on the Sync
switch. When the Sync switch is on, turn
the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Wave Shape: Selects the LFO modulation waveform
applied to the filter
Rate: Controls the effect speed
Range: Controls the filter frequency range
Level: Controls the output level
Q: Controls the sharpness of the filter
Sync: Switches Tap Tempo sync on/off
Mono I/O
Crier B
The Crier B is a controllable band pass filter
which delivers a variety of auto-wah
effects. Designed for basses, this model has
many parameters for shaping the tone of
your wah sound. Start with the frequency
range adjustment to decide the basic flavor
of your wah-wah.
You can use Tap Tempo function to control
the effect speed by turning on the Sync
switch. When the Sync switch is on, turn
the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
LFO Filter
This is a highly customable LFO-based auto
filter. Fine tune the knobs onboard to make
your creations.
You can use Tap Tempo function to control
the effect speed by turning on the Sync
switch. When the Sync switch is on, turn
the Rate knob to set a proper tap divide
value. The default value is 1/4 (no division).
Wave Shape: Selects the LFO modulation waveform
applied to the filter
Phase: Controls the LFO modulation L/R phase offset
Rate: Controls the LFO speed (effect speed)
Mode: Controls the filter mode
Range: Controls the filter frequency range
Freq: Controls the filter frequency range midpoint
Q: Controls the filter Q
Dry Level: Controls the dry signal amount
Level: Controls the effect output
Sync: Switches Tap Tempo sync on/off
Stereo I/O
Effect List
Effect Models List
*The manufacturers and product names mentioned above are trademarks or registered trademarks of their respective owners. The trademarks were used merely to identify the sound character of the products.
45
DES I GN IN S PIRATION