Owner's Manual DESIGN INSPIRATION The contents of this manual are subject to change without notice.
Contents Welcome ·································································································1 Features ···································································································1 Panel Introduction ·················································································2 Connections ····························································································2 Main Display ·································································
Welcome Thank you for purchasing a Hotone product. Please read this manual carefully to get the most out of your Omni AC. Please keep this manual in a safe place to use for further reference. Designed for both acoustic and electric instruments, the Omni AC is a compact-sized, CDCM-based “Black-Tek” acoustic simulator delivering organic, precise acoustic sounds.
Panel Introduction 1. MASTER: Controls the overall output 2. FUNC. : Encoder with button, for switching presets/acoustic simulations, editing presets, saving, etc. 3. XLR OUT: Feeds balanced signal to mixers, interfaces, etc. 4. LIFT/GND: Switch to LIFT position to lift the ground wire of XLR OUT jack 5. OUT: Unbalanced output jack 6. OLED SCREEN: Shows preset numbers, setting values and other operation info. 7. THRU: Feeds unprocessed dry signal 8. IN: For plugging in instruments or other effects 9.
Connections For live performance ● Note: Always mute the mixer/audio interface or turn down the volume knob on your amp before plugging or unplugging power jacks, cables, etc. This will reduce the chance of hearing/device damage.
Bypass/Mute (default setting) To set the unit to bypass: tap the footswitch. “BYPASS” will appear on the screen. Tap the footswitch again to go back to normal. To set the unit to mute: hold the footswitch until “MUTE” appears on the screen. Hold the footswitch again to go back to normal. Note: 1. In bypass/mute status, the LED halo will go out. 2. AUX IN will not be affected in mute status. Edit 1. Select a different acoustic simulation effect In Main Display, press the FUNC.
Edit Preset Edit Menu: 1-Return to previous menu 2-Indicates current cursor position (the PRESET VOL is now selected). 1 2 In this menu, turn FUNC. knob to select a parameter (hollow cursor) or edit parameters (solid cursor), press the FUNC. knob to confirm selection/finish editing.
Software Connect Omni AC to your computer and access the free software to manage your Omni AC device, adjust tonal settings, update firmware, restore settings, and upload presets. Omni software is compatible with Windows and macOS platforms. Log on to www.hotoneaudio.com/support to download the free software--it’s easy to install and comes with a software user manual. Effects list* NO.
DESIGN INSPIRATION
