User Manual

Table Of Contents

Connections

●

For live performance

DESI G N INSPI RATION

Note:

Always mute the mixer/audio interface or turn down the volume knob on your amp before plugging or unplugging power jacks, cables, etc. This will

reduce the chance of hearing/device damage.

·3·

Main Display

Select a Preset

The Main Display will come up as shown below after you plug in your power supply:

1- Current preset number, Omni AC supports 15 presets ranging from 01 to 15

2- Indicates the effect model you’re using in current preset

3- Indicates the current mode: EGT mode for electric instruments, AGT mode for acoustic instruments

4- Shows only when the EQ is on

In Main Display, turn the FUNC. knob to change presets. Turn the knob clockwise to cycle through presetes in the order of 01, 02, 03, …, 15 then 01.

Turn the knob counterclockwise to change presets in the opposite order.